English
| Type Motor/Gearhead |
Gear Ratio | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 |
| Speed r/min |
400 | 333 | 240 | 200 | 166 | 120 | 100 | 83 | 60 | 50 | 40 | 33 | 30 | 25 | 20 | 16 | |
| Z6D250-24GU-30S | 6GU□RC 6GU□RT |
4.35 | 5.20 | 6.50 | 8.70 | 10.4 | 14.5 | 17.4 | 18.8 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 |
| 44.4 | 53.0 | 66.3 | 88.7 | 106 | 148 | 177 | 192 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 |
Request A Quote 
-
Stepping Motors
-
AC Gear Motor
-
Brush DC Gear Motor
-
Brushless DC Gear Motor
-
Planetary DC Gear Motor
-
Planetary Gearbox
-
RV/ Harmonic Reducer
-
Worm Gearmotor And Geared Motors
-
Right Angle Type
-
Parallel Shaft
Part No.
Model
Size(mm)
Output Power(W)
Voltage(V)
Gearbox
Gear Ratio
1
Z6D
104
300
24
Right Angle Type
3-200
2
Z6D
104
250
24
Right Angle Type
3-200
3
Z55D
90
150
24
Right Angle Type
3-200
4
Z5D
90
120
24
Right Angle Type
3-200
5
Z5D
90
90
24
Right Angle Type
3-200
6
Z5D
90
60
24
Right Angle Type
3-200
7
Z5D
90
40
24
Right Angle Type
3-200
8
Z4D
80
40
24
Right Angle Type
3-200
9
Z4D
80
25
24
Right Angle Type
3-200
10
Z6D
104
250
12-220
Parallel shaft
3-200
11
Z55D
90
250
12-220
Parallel shaft
3-200
12
Z5D
90
120
12-90
Parallel shaft
3-200
13
Z5D
90
90
12-90
Parallel shaft
3-200
14
Z5D
90
60
12-90
Parallel shaft
3-200
15
Z5D
90
40
12-90
Parallel shaft
3-200
16
Z4D
80
40
12-90
Parallel shaft
3-200
17
Z4D
80
25
12-90
Parallel shaft
3-200
18
Z3D
70
25
12-90
Parallel shaft
3-200
19
Z2D
60
15
12-90
Parallel shaft
3-200
20
Z2D
60
10
12-90
Parallel shaft
3-200
21
Z2D
60
6
12-90
Parallel shaft
3-200
Brush DC Gear Motor
300W Right Angle DC Brush Gear Motor
●Gearhead and mid-gearbox can be sold separately.
●Enter the reduction ratio into the blank (□) within the model name.
●(□) Indicates the opposite rotating direction between motor shaft and gearbox shaft while others are in same direction.
●The speed is calculated by dividing the motor's synchronous speed by the reduction ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 60N·m.
Brush DC Gear Motor
250W Right Angle DC Brush Gear Motor
●Gearhead and mid-gearbox can be sold separately.
●Enter the reduction ratio into the blank (□) within the model name.
●(□) Indicates the opposite rotating direction between motor shaft and gearbox shaft while others are in same direction.
●The speed is calculated by dividing the motor's synchronous speed by the reduction ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 60N·m.
| Type Motor/Gearhead |
Gear Ratio | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 |
| Speed r/min |
400 | 333 | 240 | 200 | 166 | 120 | 100 | 83 | 60 | 50 | 40 | 33 | 30 | 25 | 20 | 16 | |
| Z6D250-24GU-30S | 6GU□RC 6GU□RT |
4.35 | 5.20 | 6.50 | 8.70 | 10.4 | 14.5 | 17.4 | 18.8 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 |
| 44.4 | 53.0 | 66.3 | 88.7 | 106 | 148 | 177 | 192 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 |
Brush DC Gear Motor
250W Right Angle DC Brush Gear Motor
●Gearhead and mid-gearbox can be sold separately.
●Enter the reduction ratio into the blank (□) within the model name.
●(□) Indicates the opposite rotating direction between motor shaft and gearbox shaft while others are in same direction.
●The speed is calculated by dividing the motor's synchronous speed by the reduction ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 20N·m.
| Type Motor/Gearhead |
Gear Ratio | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 |
| Speed r/min |
400 | 333 | 240 | 200 | 166 | 120 | 100 | 83 | 60 | 50 | 40 | 33 | 30 | 25 | 20 | 16 | |
| Z55D250-24GU-30S | 5GU□RC 5GU□RT |
4.35 | 5.20 | 6.50 | 8.70 | 10.4 | 14.5 | 17.4 | 18.8 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 |
| 44.4 | 53.0 | 66.3 | 88.7 | 106 | 148 | 177 | 192 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 |
Brush DC Gear Motor
120W Right Angle DC Brush Gear Motor
●Gearhead and mid-gearbox can be sold separately.
●Enter the reduction ratio into the blank (□) within the model name.
●(□) Indicates the opposite rotating direction between motor shaft and gearbox shaft while others are in same direction.
●The speed is calculated by dividing the motor's synchronous speed by the reduction ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 20N·m.
| Type Motor/Gearhead |
Gear Ratio | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 |
| Speed r/min |
346 | 288 | 208 | 173 | 144 | 104 | 86 | 72 | 52 | 43 | 34 | 28 | 26 | 21 | 17 | 14 | |
| Z5D120-24GU-26S | 5GU□RC 5GU□RT |
2.41 | 5.44 | 4.02 | 4.82 | 5.78 | 8.03 | 9.64 | 10.4 | 14.5 | 17.4 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 |
| 24.6 | 55.5 | 41.0 | 49.2 | 59.0 | 81.9 | 98.3 | 106 | 148 | 177 | 200 | 200 | 200 | 200 | 200 | 200 |
Brush DC Gear Motor
90W Right Angle DC Brush Gear Motor
●Gearhead and mid-gearbox can be sold separately.
●Enter the reduction ratio into the blank (□) within the model name.
●(□) Indicates the opposite rotating direction between motor shaft and gearbox shaft while others are in same direction.
●The speed is calculated by dividing the motor's synchronous speed by the reduction ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 20N·m.
| Type Motor/Gearhead |
Gear Ratio | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 |
| Speed r/min |
373 | 311 | 224 | 186 | 155 | 112 | 93 | 77 | 56 | 46 | 37 | 31 | 28 | 23 | 18 | 15 | |
| Z5D90-24GU-28S | 5GU□RC 5GU□RT |
1.68 | 2.01 | 2.80 | 3.36 | 4.03 | 5.59 | 6.71 | 7.25 | 10.1 | 12.1 | 15.1 | 18.1 | 20.0 | 20.0 | 20.0 | 20.0 |
| 17.1 | 20.5 | 28.6 | 34.3 | 41.1 | 57.0 | 68.4 | 74.0 | 103 | 123 | 154 | 185 | 200 | 200 | 200 | 200 |
Brush DC Gear Motor
60W Right Angle DC Brush Gear Motor
●Gearhead and mid-gearbox can be sold separately.
●Enter the reduction ratio into the blank (□) within the model name.
●(□) Indicates the opposite rotating direction between motor shaft and gearbox shaft while others are in same direction.
●The speed is calculated by dividing the motor's synchronous speed by the reduction ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 20N·m.
| Type Motor/Gearhead |
Gear Ratio | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 |
| Speed r/min |
373 | 311 | 224 | 186 | 155 | 112 | 93 | 77 | 56 | 46 | 37 | 31 | 28 | 23 | 18 | 15 | |
| Z5D60-24GU-28S | 5GU□RC 5GU□RT |
1.12 | 1.34 | 1.86 | 2.24 | 2.69 | 3.73 | 4.48 | 4.83 | 6.71 | 8.06 | 10.1 | 12.1 | 13.4 | 16.1 | 20.0 | 20.0 |
| 11.4 | 13.7 | 19.0 | 22.8 | 27.4 | 38.0 | 45.7 | 49.3 | 68.4 | 82.2 | 103 | 123 | 137 | 164 | 200 | 200 |
Brush DC Gear Motor
40W Right Angle DC Brush Gear Motor
●Gearhead and mid-gearbox can be sold separately.
●Enter the reduction ratio into the blank (□) within the model name.
●(□) Indicates the opposite rotating direction between motor shaft and gearbox shaft while others are in same direction.
●The speed is calculated by dividing the motor's synchronous speed by the reduction ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 20N·m.
| Type Motor/Gearhead |
Gear Ratio | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 |
| Speed r/min |
373 | 311 | 224 | 186 | 155 | 112 | 93 | 77 | 56 | 46 | 37 | 31 | 28 | 23 | 18 | 15 | |
| Z5D40-24GU-28S | 5GU□RC 5GU□RT |
0.75 | 0.90 | 1.24 | 1.49 | 1.79 | 2.32 | 2.78 | 3.01 | 4.18 | 5.37 | 6.71 | 8.06 | 8.95 | 10.7 | 13.4 | 16.1 |
| 7.65 | 9.18 | 12.6 | 15.2 | 18.3 | 23.7 | 28.4 | 30.7 | 42.6 | 54.8 | 68.4 | 82.2 | 91.3 | 109 | 137 | 164 |
Brush DC Gear Motor
40W Right Angle DC Brush Gear Motor
●Gearhead and mid-gearbox can be sold separately.
●Enter the reduction ratio into the blank (□) within the model name.
●(□) Indicates the opposite rotating direction between motor shaft and gearbox shaft while others are in same direction.
●The speed is calculated by dividing the motor's synchronous speed by the reduction ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 20N·m.
| Type Motor/Gearhead |
Gear Ratio | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 |
| Speed r/min |
400 | 333 | 240 | 200 | 166 | 120 | 100 | 83 | 60 | 50 | 40 | 33 | 30 | 25 | 20 | 16 | |
| Z4D40-24GN-30S | 4GN□RC 4GN□RT |
0.70 | 0.84 | 1.16 | 1.39 | 1.67 | 2.32 | 2.78 | 3.34 | 4.64 | 5.01 | 6.27 | 7.52 | 80.0 | 80.0 | 80.0 | 80.0 |
| 7.14 | 8.57 | 11.8 | 14.2 | 17.0 | 23.7 | 28.4 | 34.1 | 47.3 | 51.1 | 64.0 | 76.7 | 80.0 | 80.0 | 80.0 | 80.0 |
Brush DC Gear Motor
25W Right Angle DC Brush Gear Motor
●Gearhead and mid-gearbox can be sold separately.
●Enter the reduction ratio into the blank (□) within the model name.
●(□) Indicates the opposite rotating direction between motor shaft and gearbox shaft while others are in same direction.
●The speed is calculated by dividing the motor's synchronous speed by the reduction ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 8N·m.
| Type Motor/Gearhead |
Gear Ratio | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 |
| Speed r/min |
400 | 333 | 240 | 200 | 166 | 120 | 100 | 83 | 60 | 50 | 40 | 33 | 30 | 25 | 20 | 16 | |
| Z4D40-24GN-30S | 4GN□RC 4GN□RT |
0.70 | 0.84 | 1.16 | 1.39 | 1.67 | 2.32 | 2.78 | 3.34 | 4.64 | 5.01 | 6.27 | 7.52 | 80.0 | 80.0 | 80.0 | 80.0 |
| 7.14 | 8.57 | 11.8 | 14.2 | 17.0 | 23.7 | 28.4 | 34.1 | 47.3 | 51.1 | 64.0 | 76.7 | 80.0 | 80.0 | 80.0 | 80.0 |
Brush DC Gear Motor
250W Brush DC Gear Motor
| Model | Voltage | Power | No-load Parameters | Load Parameters | Brush Life | Motor Weight | |||
| Speed | Current | Speed | Torque | Current | |||||
| V | W | r/min | A | r/min | mN.m | A | H | kg | |
| Z6D250-24□ | 24 | 250 | 3400 | 3.0Max. | 3000 | 796 | 16.0 | 2000 | 3.2 |
| Z6D250-90□ | 90 | 250 | 3300 | 1.0Max. | 3000 | 796 | 4.00 | 2000 | 3.2 |
| 76D250-220□ | 220 | 250 | 3300 | 0.8Max. | 3000 | 796 | 2.00 | 2000 | 3.2 |
●Motor voltage, power and speed will be customized according to his requestment under the allowed circumstance of adoptable dimension.
●Motor
| Type | Model | ||
| Pinion Shaft | Round Shaft | Round Shaft | |
| Lead Wire Type | Z6D250-24GU | Z6D250-24A | Z6D250-24A1 |
| Z6D250-90GU | Z6D250-90A | Z6D250-90A1 | |
| Z6D250-220GU | Z6D250-220A | Z6D250-220A1 | |
●Parallel Shaft Gearhead (Sold Separately)
| Gearhead Type | Gearhead Model | Gear Ratio |
| Long Life ● Low Noise | 6GU□K | 3、3.6、5、6、7.5、9、 12.5、15、18、25、30、 36、50、60、75、90、 100、120、150、180、200 |
| 5GU10XK(Decimal Gearhead) | ||
●Enter the gear ratio in the box (□) within the model name.
●Characteristic Curve Of Motor
●Wiring Diagram Of Motor
Standard length of lead wire: 300mm±10, model: Ul1015, type: AWG14; lead wire length, model will be customised by dient request meant under allowed circumstance of adoptable dimension.
●Gearheads are sold separately. Decimal gearheads are not available.
●Enter the gear ratio in the box (□) within the model name.
●The colored background (□) indicates the same rotating direction of the motor while the rotating direction of others are opposite.
●The speed is calculated by dividing the motor's synchronous speed by the gear ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 40N·m.
| Type | Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| Z6D250-24GN | Speed r/min | 1000 | 833 | 600 | 500 | 400 | 333 | 240 | 200 | 166 | 120 | 100 | 83 | 60 | 50 | 40 | 33 | 30 | 25 | 20 | 16 | 15 |
| 6GU□K | 1.93 | 2.32 | 3.22 | 3.87 | 4.83 | 5.80 | 7.25 | 8.70 | 10.4 | 13.1 | 15.7 | 18.8 | 26.1 | 31.3 | 39.2 | 40.0 | 40.0 | 40.0 | 40.0 | 40.0 | 40.0 | |
| 19.0 | 22.7 | 31.6 | 37.9 | 47.4 | 56.9 | 71.1 | 85.3 | 102 | 128 | 154 | 184 | 256 | 307 | 384 | 400 | 400 | 400 | 400 | 400 | 400 |
Mounting screws are included with gearhead.
●Lead Wiring Type
Weight：Motor：3.2kg Gearhead：1.5kg
| Motor Model | Gearhead Model | Gear Ratio | L1 |
| Z6D250-24GU Z6D250-90GU Z6D250-220GU |
6GU□K | 3～200 | 72 |
●Enter the gear ratio in the box (□) within the model name.
●Key●Keyway (The Key Is Included With The Gearhead)
●Shaft Section Of Round Shaft Type
Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.
Brush DC Gear Motor
250W Brush DC Gear Motor
| Model | Voltage | Power | No-load Parameters | Load Parameters | Brush Life | Motor Weight | |||
| Speed | Current | Speed | Torque | Current | |||||
| V | W | r/min | A | r/min | mN.m | A | H | kg | |
| Z55D250-24□ | 24 | 250 | 3400 | 3.0Max. | 3000 | 796 | 16.0 | 2000 | 3.2 |
| Z55D250-90□ | 90 | 250 | 3300 | 1.2Max. | 3000 | 796 | 4.20 | 2000 | 3.2 |
| Z55D250-220□ | 220 | 250 | 3300 | 0.9Max. | 3000 | 796 | 2.20 | 2000 | 3.2 |
●Motor voltage, power and speed will be customized according to his requestment under the allowed circumstance of adoptable dimension.
●Motor
| Type | Model | ||
| Pinion Shaft | Round Shaft | Round Shaft | |
| Lead Wire Type | Z55D250-24GN | Z55D250-24A | Z55D250-24A1 |
| Z55D250-90GN | Z55D250-90A | Z55D250-90A1 | |
| Z55D250-220GN | Z55D250-220A | Z55D250-220A1 | |
●Parallel Shaft Gearhead (Sold Separately)
| Gearhead Type | Gearhead Model | Gear Ratio |
| Long Life ● Low Noise | 5GU□KB | 3、3.6、5、6、7.5、9、10、 12.5、15、18、20、25、30、 36、40、50、60、75、90、 100、120、150、180、200 |
| 5GU10XK(Decimal Gearhead) | ||
●Enter the gear ratio in the box (□) within the model name.
●Characteristic Curve Of Motor
●Wiring Diagram Of Motor
Standard length of lead wire: 300mm±10, model: Ul1015, type: AWG14; lead wire length, model will be customised by dient request meant under allowed circumstance of adoptable dimension.
●Gearheads are sold separately. Decimal gearheads are not available.
●Enter the gear ratio in the box (□) within the model name.
●The colored background (□) indicates the same rotating direction of the motor while the rotating direction of others are opposite.
●The speed is calculated by dividing the motor's synchronous speed by the gear ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 20N·m.
| Type | Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| Z55D250-24GU |
Speed r/min |
1000 | 833 | 600 | 500 | 400 | 333 | 300 | 240 | 200 | 167 | 150 | 120 | 100 | 83 | 75 | 60 | 50 | 40 | 33 | 30 | 25 | 20 | 17 | 15 |
| 5GU□KB | 1.93 | 2.32 | 3.22 | 3.87 | 4.83 | 5.80 | 5.80 | 7.25 | 8.70 | 10.4 | 10.4 | 13.1 | 15.7 | 18.8 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | |
| 19.0 | 22.7 | 31.6 | 37.9 | 47.4 | 56.9 | 56.9 | 71.1 | 85.3 | 102 | 102 | 128 | 154 | 184 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 |
Mounting screws are included with gearhead.
●Lead Wiring Type
Weight：Motor：3.2kg Gearhead：1.5kg
| Motor Model | Gearhead Model | Gear Ratio | L1 |
| Z55D250-24GU Z55D250-90GU Z55D250-220GU |
5GU□KB | 3～200 | 65.5 |
●Enter the gear ratio in the box (□) within the model name.
●Flange Mounting Reducer
Can be mounted on GU type gear shaft 5GU□K
Weight:1.5kg
●Key●Keyway (The Key Is Included With The Gearhead)
●Shaft Section Of Round Shaft Type
Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.
●Decimal Gearhead
Can be connected to GU pinion shaft type
5GU10X
Weight：0.651kg
Brush DC Gear Motor
120W Brush DC Gear Motor
| Model | Voltage | Power | No-load Parameters | Load Parameters | BrushLife | Motor Weight | |||||||||
| Speed | Current | Speed | Torque | Current | |||||||||||
| V | W | r/min | A | r/min | mN.m | A | H | kg | |||||||
| Z5D120-12□ | 12 | 120 | 3100 | 2.0Max. | 2500 | 458 | 15.0 | 2000 | 2.2 | ||||||
| Z5D120-24□ | 24 | 120 | 3200 | 1.0Max. | 2600 | 441 | 7.00 | 2000 | 2.2 | ||||||
| Z5D120-90□ | 90 | 120 | 3000 | 0.3Max. | 2600 | 441 | 2.00 | 2000 | 2.2 | ||||||
●Motor voltage, power and speed will be customized according to his requestment under the allowed circumstance of adoptable dimension.
●Motor
| Type | Model | ||||
| Pinion Shaft | Round Shaft | Round Shaft | |||
| Lead Wire Type | Z5D120-12GN | Z5D120-12A | Z5D120-12A1 | ||
| Z5D120-24GN | Z5D120-24A | Z5D120-24A1 | |||
| Z5D120-90GN | Z5D120-90A | Z5D120-90A1 | |||
●Parallel Shaft Gearhead (Sold Separately)
| Gearhead Type | Gearhead Model | Gear Ratio |
| Long Life ● Low Noise | 5GU□KB | 3、3.6、5、6、7.5、9、10、 12.5、15、18、20、25、30、 36、40、50、60、75、90、 100、120、150、180、200 |
| 5GU10XK(Decimal Gearhead) | ||
●Enter the gear ratio in the box (□) within the model name.
●Characteristic Curve Of Motor
●Wiring Diagram Of Motor
Stanclard length of lead wire: 300mm±10, model: Ul1015, type: AWG16; lead wire length, model will be customerised by dient requestmant under allowed circumstamce of adoptable dimension.
●Gearheads are sold separately. Decimal gearheads are not available.
●Enter the gear ratio in the box (□) within the model name.
●The colored background (□) indicates the same rotating direction of the motor while the rotating direction of others are opposite.
●The speed is calculated by dividing the motor's synchronous speed by the gear ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 20N·m.
| Type | Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| Z5D120-24GU |
Speed r/min |
867 | 722 | 520 | 433 | 347 | 289 | 260 | 208 | 173 | 144 | 130 | 104 | 87 | 72 | 65 | 52 | 43 | 35 | 29 | 26 | 22 | 17 | 14 | 13 |
| 5GU□KB | 1.07 | 1.29 | 1.79 | 2.14 | 2.68 | 3.21 | 3.21 | 4.02 | 4.82 | 5.78 | 5.78 | 7.23 | 8.68 | 10.4 | 11.6 | 14.5 | 17.4 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | |
| 10.5 | 12.6 | 17.5 | 21.0 | 26.2 | 31.5 | 31.5 | 39.4 | 47.2 | 56.7 | 56.7 | 70.9 | 85.0 | 102 | 113 | 142 | 170 | 200 | 200 | 200 | 200 | 200 | 200 | 200 |
Mounting screws are included with gearhead.
●Lead Wiring Type
Weight：Motor：2.2kg Gearhead：1.5kg
| Motor Model | Gearhead Model | Gear Ratio | L1 |
| Z5D120-12GU Z5D120-24GU Z5D120-90GU |
5GU□KB | 3～200 | 65.5 |
●Enter the gear ratio in the box (□) within the model name.
●Flange Mounting Reducer
Can be mounted on GU type gear shaft 5GU□K.
Weight:1.5kg
●Key●Keyway (The Key Is Included With The Gearhead)
●Shaft Section Of Round Shaft Type
Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.
●Decimal Gearhead
Can be connected to GN pinion shaft type
5GU10X
Weight：0.651kg
Brush DC Gear Motor
90W Brush DC Gear Motor
| Model | Voltage | Power | No-load Parameters | Load Parameters | Brush Life | Motor Weight | |||
| Speed | Current | Speed | Torque | Current | |||||
| V | W | r/min | A | r/min | mN.m | A | H | kg | |
| Z5D90-12□ | 12 | 90 | 3100 | 2.0Max. | 2600 | 330 | 12.0 | 2000 | 2.2 |
| 75D90-24□ | 24 | 90 | 3300 | 1.0Max. | 2800 | 307 | 5.00 | 2000 | 2.2 |
| Z5D90-90□ | 90 | 90 | 3000 | 0.3Max. | 2900 | 307 | 1.40 | 2000 | 2.2 |
●Motor voltage, power and speed will be customized according to his requestment under the allowed circumstance of adoptable dimension.
●Motor
| Type | Model | ||
| Pinion Shaft | Round Shaft | Round Shaft | |
| Lead Wire Type | Z5D90-12GN | Z5D90-12A | Z5D90-12A1 |
| Z5D90-24GN | Z5D90-24A | Z5D90-24A1 | |
| Z5D90-90GN | Z5D90-90A | Z5D90-90A1 | |
●Parallel Shaft Gearhead (Sold Separately)
| Gearhead Type | Gearhead Model | Gear Ratio |
| Long Life ● Low Noise | 5GU□KB | 3、3.6、5、6、7.5、9、10、 12.5、15、18、20、25、30、 36、40、50、60、75、90、 100、120、150、180、200 |
| 5GU10XK(Decimal Gearhead) | ||
●Enter the gear ratio in the box (□) within the model name.
●Characteristic Curve Of Motor
●Wiring Diagram Of Motor
Standard length of lead wire: 300mm±10, model: Ul1015, type: AWG16; lead wire length, model will be customerised by dient request meant under allowed circumstance of adoptable dimension.
●Gearheads are sold separately. Decimal gearheads are not available.
●Enter the gear ratio in the box (□) within the model name.
●The colored background (□) indicates the same rotating direction of the motor while the rotating direction of others are opposite.
●The speed is calculated by dividing the motor's synchronous speed by the gear ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 20N·m
| Type | Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| Z5D90-24GU | Speed r/min |
933 | 778 | 560 | 467 | 373 | 311 | 280 | 224 | 187 | 156 | 140 | 112 | 93 | 78 | 70 | 56 | 47 | 37 | 31 | 28 | 23 | 19 | 16 | 14 |
| 5GU□KB | 0.75 | 0.90 | 1.24 | 1.49 | 1.86 | 2.24 | 2.24 | 2.80 | 3.36 | 4.03 | 4.03 | 5.03 | 6.04 | 7.25 | 8.06 | 10.1 | 12.4 | 15.1 | 16.3 | 18.1 | 20.0 | 20.0 | 20.0 | 20.0 | |
| 7.31 | 8.77 | 12.2 | 14.6 | 18.3 | 21.9 | 21.9 | 27.4 | 32.9 | 39.5 | 39.5 | 49.3 | 59.2 | 71.1 | 78.9 | 98.7 | 118 | 148 | 160 | 178 | 200 | 200 | 200 | 200 |
Mounting screws are included with gearhead.
●Lead Wiring Type
Weight：Motor：2.2kg Gearhead：1.5kg
| Motor Model | Gearhead Model | Gear Ratio | L1 |
| Z5D90-12GU Z5D90-24GU Z5D90-90GU |
5GU□KB | 3～200 | 65.5 |
●Enter the gear ratio in the box (□) within the model name.
●Gear ratio 3~18, short case is possible (L1=32).
●Flange Mounting Reducer
Can be mounted on GU type gear shaft 5GU□K
Weight:1.5kg
●Key●Keyway (The Key Is Included With The Gearhead)
●Shaft Section Of Round Shaft Type
Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.
●Decimal Gearhead
Can be connected to GU pinion shaft type
5GU10X
Weight：0.651kg
Brush DC Gear Motor
60W Brush DC Gear Motor
| Model | Voltage | Power | No-load Parameters | Load Parameters | Brush Life | Motor Weight | |||
| Speed | Current | Speed | Torque | Current | |||||
| V | W | r/min | A | r/min | mN.m | A | H | kg | |
| Z5D60-12□ | 12 | 60 | 3000 | 2.0Max. | 2600 | 220 | 9.0 | 2000 | 2.2 |
| Z5D60-24□ | 24 | 60 | 3100 | 1.0Max. | 2800 | 205 | 3.8 | 2000 | 2.2 |
| Z5D60-90□ | 90 | 60 | 3100 | 0.3Max. | 2900 | 198 | 1.0 | 2000 | 2.2 |
●Motor voltage, power and speed will be customized according to his requestment under the allowed circumstance of adoptable dimension.
●Motor
| Type | Model | ||
| Pinion Shaft | Round Shaft | Round Shaft | |
| Lead Wire Type | Z5D60-12GU | Z5D60-12A | Z5D60-12A1 |
| Z5D60-24GU | Z5D60-24A | Z5D60-24A1 | |
| Z5D60-90GU | Z5D60-90A | Z5D60-90A1 | |
●Parallel Shaft Gearhead (Sold Separately)
| Gearhead Type | Gearhead Model | Gear Ratio |
| Long Life ● Low Noise | 5GU□KB | 3、3.6、5、6、7.5、9、10、 12.5、15、18、20、25、30、 36、40、50、60、75、90、 100、120、150、180、200 |
| 5GU10XK(Decimal Gearhead) | ||
●Enter the gear ratio in the box (□) within the model name.
●Characteristic Curve Of Motor
●Wiring Diagram Of Motor
Standard length of lead wire: 300mm±10, model: Ul1015, type: AWG16; lead wire length, model will be customerised by dient request meant under allowed circumstance of adoptable dimension.
●Gearheads are sold separately. Decimal gearheads are not available.
●Enter the gear ratio in the box (□) within the model name.
●The colored background (□) indicates the same rotating direction of the motor while the rotating direction of others are opposite.
●The speed is calculated by dividing the motor's synchronous speed by the gear ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 20N·m
| Type | Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| Z5D60-24GU |
Speed r/min |
933 | 778 | 560 | 467 | 373 | 311 | 280 | 224 | 187 | 156 | 140 | 112 | 93 | 78 | 70 | 56 | 47 | 37 | 31 | 28 | 23 | 19 | 16 | 14 |
| 5GU□KB | 0.50 | 0.60 | 0.83 | 0.99 | 1.24 | 1.49 | 1.49 | 1.86 | 2.24 | 2.69 | 2.69 | 3.36 | 4.03 | 4.83 | 5.37 | 6.71 | 8.06 | 10.1 | 10.9 | 12.1 | 14.5 | 18.1 | 20.0 | 20.0 | |
| 4.87 | 5.85 | 8.12 | 9.75 | 12.2 | 14.6 | 14.6 | 18.3 | 21.9 | 26.3 | 26.3 | 32.9 | 39.5 | 47.4 | 52.6 | 65.8 | 78.9 | 98.7 | 107 | 118 | 142 | 178 | 200 | 200 |
Mounting screws are included with gearhead.
●Lead Wiring Type
Weight：Motor：2.2kg Gearhead：1.5kg
| Motor Model | Gearhead Model | Gear Ratio | L1 |
| Z5D60-12GU Z5D60-24GU Z5D60-90GU |
5GU□KB | 3～200 | 65.5 |
●Enter the gear ratio in the box (□) within the model name.
●Gear ratio 3~18, short case is possible (L1=32).
●Flange Mounting Reducer
Can be mounted on GU type gear shaft 5GU□K
Weight:1.5kg
●Key●Keyway (The Key Is Included With The Gearhead)
●Shaft Section Of Round Shaft Type
Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.
●Decimal Gearhead
Can be connected to GU pinion shaft type
5GU10X
Weight：0.651kg
Brush DC Gear Motor
40W Brush DC Gear Motor
| Model | Voltage | Power | No-load Parameters | Load Parameters | Brush Life | Motor Weight | |||
| Speed | Current | Speed | Torque | Current | |||||
| V | W | r/min | A | r/min | mN.m | A | H | kg | |
| Z5D40-12□ | 12 | 40 | 3100 | 2.0Max. | 2800 | 136 | 5.2 | 2000 | 1.9 |
| Z5D40-24□ | 24 | 40 | 3000 | 1.0Max. | 2800 | 136 | 2.6 | 2000 | 1.9 |
| Z5D40-90□ | 90 | 40 | 3200 | 0.3Max. | 3000 | 127 | 0.7 | 2000 | 1.9 |
●Motor voltage, power and speed will be customized according to his requestment under the allowed circumstance of adoptable dimension.
●Motor
| Type | Model | ||
| Pinion Shaft | Round Shaft | Round Shaft | |
| Lead Wire Type | Z5D40-12GN | Z5D40-12A | Z5D40-12A1 |
| Z5D40-24GN | Z5D40-24A | Z5D40-24A1 | |
| Z5D40-90GN | Z5D40-90A | Z5D40-90A1 | |
●Parallel Shaft Gearhead (Sold Separately)
| Gearhead Type | Gearhead Model | Gear Ratio |
| Long Life ●Low Noise | 5GN□K | 3、3.6、5、6、7.5、9、10、 12.5、15、18、20、25、30、 36、40、50、60、75、90、 100、120、150、180、200 |
| 5GN10XK(Decimal Gearhead) | ||
●Enter the gear ratio in the box (□) within the model name.
●Characteristic Curve Of Motor
●Wiring Diagram Of Motor
Standard length of lead wire: 300mm±10, model: Ul1015, type: AWG16; lead wire length, model will be customerised by dient request meant under allowed circumstance of adoptable dimension.
●Gearheads are sold separately. Decimal gearheads are not available.
●Enter the gear ratio in the box (□) within the model name.
●The colored background (□) indicates the same rotating direction of the motor while the rotating direction of others are opposite.
●The speed is calculated by dividing the motor's synchronous speed by the gear ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 10N·m
| Type | Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| Z5D40-24GN |
Speed r/min |
933 | 778 | 560 | 467 | 373 | 311 | 280 | 224 | 187 | 156 | 140 | 112 | 93 | 78 | 70 | 56 | 47 | 37 | 31 | 28 | 23 | 19 | 16 | 14 |
| 5GN□K | 0.33 | 0.40 | 0.55 | 0.66 | 0.83 | 0.99 | 1.11 | 1.38 | 1.66 | 1.79 | 1.99 | 2.49 | 2.98 | 3.58 | 3.58 | 4.48 | 5.37 | 6.71 | 8.06 | 8.95 | 10.0 | 10.0 | 10.0 | 10.0 | |
| 3.25 | 3.90 | 5.41 | 6.50 | 8.12 | 9.75 | 10.8 | 13.5 | 16.2 | 17.5 | 19.5 | 24.4 | 29.2 | 35.1 | 35.1 | 43.9 | 52.6 | 65.8 | 78.9 | 87.7 | 100 | 100 | 100 | 100 |
Mounting screws are included with gearhead.
●Lead Wiring Type
Weight：Motor：1.9kg Gearhead：1.35kg
| Motor Model | Gearhead Model | Gear Ratio | L1 |
| Z5D40-12GN Z5D40-24GN Z5D40-90GN |
5GN□K | 3～200 | 42.5 |
●Enter the gear ratio in the box (□) within the model name.
●Gear ratio 3~18, short case is possible (L1=32).
●Key●Keyway (The Key Is Included With The Gearhead)
●Shaft Section Of Round Shaft Type
Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.
●Decimal Gearhead
Can be connected to GN pinion shaft type
5GN10X
Weight：0.41kg
Brush DC Gear Motor
40W Brush DC Gear Motor
| Model | Voltage | Power | No-load Parameters | Load Parameters | Brush Life | Motor Weight | |||||||||
| Speed | Current | Speed | Torque | Current | |||||||||||
| V | W | r/min | A | r/min | mN.m | A | H | kg | |||||||
| Z4D40-12□ | 12 | 40 | 3100 | 2.0Max. | 2800 | 136 | 5.2 | 2000 | 1.8 | ||||||
| Z4D40-24□ | 24 | 40 | 3100 | 0.8Max. | 3000 | 127 | 2.1 | 2000 | 1.8 | ||||||
| Z4D40-90□ | 90 | 40 | 3200 | 0.3Max | 3000 | 127 | 0.7 | 2000 | 1.8 | ||||||
●Motor voltage, power and speed will be customized according to his requestment under the allowed circumstance of adoptable dimension.
●Motor
| Type | Model | |
| Pinion Shaft | Round Shaft | |
| Lead Wire Type | Z4D40-12GN | Z4D40-12A |
| Z4D40-24GN | Z4D40-24A | |
| Z4D40-90GN | Z4D40-90A | |
●Parallel Shaft Gearhead (Sold Separately)
| Gearhead Type | Gearhead Model | Gear Ratio |
| Long Life ●Low Noise | 4GN□K | 3、3.6、5、6、7.5、9、10、 12.5、15、18、20、25、30、 36、40、50、60、75、90、 100、120、150、180、200 |
| 4GN10XK(Decimal Gearhead) | ||
●Enter the gear ratio in the box (□) within the model name.
●Characteristic Curve Of Motor
●Wiring Diagram Of Motor
Standard length of lead wire: 300mm±10, model: Ul1015, type: AWG16; lead wire length, model will be customerised by dient request meant under allowed circumstance of adoptable dimension.
●Gearheads are sold separately. Decimal gearheads are not available.
●Enter the gear ratio in the box (□) within the model name.
●The colored background (□) indicates the same rotating direction of the motor while the rotating direction of others are opposite.
●The speed is calculated by dividing the motor's synchronous speed by the gear ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 8N·m
| Type | Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| Z4D40-24GN |
Speed r/min |
1000 | 833 | 600 | 500 | 400 | 333 | 300 | 240 | 200 | 167 | 150 | 120 | 100 | 83 | 75 | 60 | 50 | 40 | 33 | 30 | 25 | 20 | 17 | 15 |
| 4GN□K | 0.31 | 0.37 | 0.52 | 0.62 | 0.77 | 0.93 | 1.03 | 1.29 | 1.55 | 1.86 | 2.06 | 2.32 | 2.78 | 3.34 | 3.71 | 4.64 | 5.01 | 6.27 | 7.52 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 | |
| 3.03 | 3.64 | 5.05 | 6.06 | 7.58 | 9.10 | 10.1 | 12.6 | 15.2 | 18.2 | 20.2 | 22.7 | 27.3 | 32.7 | 36.4 | 45.5 | 49.1 | 61.4 | 73.7 | 80.0 | 80.0 | 80.0 | 80.0 | 80.0 |
Mounting screws are included with gearhead.
●Lead Wiring Type
Weight：Motor：1.8kg Gearhead：0.80kg
| Motor Model | Gearhead Model | Gear Ratio | L1 |
| Z4D40-12GN Z4D40-24GN Z4D40-90GN |
4GN□K | 3～200 | 42.5 |
●Enter the gear ratio in the box (□) within the model name.
●Gear ratio 3~18, short case is possible (L1=32).
●Key●Keyway (The Key Is Included With The Gearhead)
●Shaft Section Of Round Shaft Type
Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.
●Decimal Gearhead
Can be connected to GN pinion shaft type
4GN10X
Weight：0.41kg
Brush DC Gear Motor
25W Brush DC Gear Motor
| Model | Voltage | Power | No-load Parameters | Load Parameters | BrushLife | Motor Weight | |||||||||
| Speed | Current | Speed | Torque | Current | |||||||||||
| V | W | r/min | A | r/min | mN.m | A | H | kg | |||||||
| Z4D25-12□ | 12 | 25 | 3200 | 1.4Max. | 3100 | 77 | 3.6 | 2000 | 1.7 | ||||||
| Z4D25-24□ | 24 | 25 | 3000 | 0.7Max. | 2850 | 84 | 1.7 | 2000 | 1.7 | ||||||
| Z4D25-90□ | 90 | 25 | 3200 | 0.2Max | 3000 | 80 | 0.5 | 2000 | 1.7 | ||||||
●Motor voltage, power and speed will be customized according to his requestment under the allowed circumstance of adoptable dimension.
●Motor
| Type | Model | |
| Pinion Shaft | Round Shaft | |
| Lead Wire Type | Z4D25-12GN | Z4D25-12A |
| Z4D25-24GN | Z4D25-24A | |
| Z4D25-90GN | Z4D25-90A | |
●Parallel Shaft Gearhead (Sold Separately)
| Gearhead Type | Gearhead Model | Gear Ratio |
| Long Life ●Low Noise | 4GN□K | 3、3.6、5、6、7.5、9、10、 12.5、15、18、20、25、30、 36、40、50、60、75、90、 100、120、150、180、200 |
| 4GN10XK(Decimal Gearhead) | ||
●Enter the gear ratio in the box (□) within the model name.
●Characteristic Curve Of Motor
●Wiring Diagram Of Motor
Standard length of lead wire: 300mm±10, model: Ul1015, type: AWG20; lead wire length, model will be customized by dient request meant under allowed circumstance of adoptable dimension.
●Gearheads are sold separately. Decimal gearheads are not available.
●Enter the gear ratio in the box (□) within the model name.
●The colored background (□) indicates the same rotating direction of the motor while the rotating direction of others are opposite.
●The speed is calculated by dividing the motor's synchronous speed by the gear ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 8N·m
| Type | Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| Z4D25-24GN |
Speed r/min |
950 | 792 | 570 | 475 | 380 | 317 | 285 | 228 | 190 | 158 | 143 | 114 | 95 | 79 | 71 | 57 | 48 | 38 | 32 | 29 | 24 | 19 | 16 | 14 |
| 4GN□K | 0.20 | 0.24 | 0.34 | 0.41 | 0.51 | 0.61 | 0.68 | 0.85 | 1.02 | 1.22 | 1.36 | 1.53 | 1.83 | 2.20 | 2.44 | 3.05 | 3.30 | 4.12 | 4.95 | 5.50 | 6.60 | 8.00 | 8.00 | 8.00 | |
| 1.99 | 2.39 | 3.32 | 3.99 | 4.99 | 5.98 | 6.65 | 8.31 | 10.0 | 12.0 | 13.3 | 15.0 | 18.0 | 21.5 | 23.9 | 29.9 | 32.3 | 40.4 | 48.5 | 53.9 | 64.6 | 80.0 | 80.0 | 80.0 |
Mounting screws are included with gearhead.
●Lead Wiring Type
Weight：Motor：1.7kg Gearhead：0.80kg
| Motor Model | Gearhead Model | Gear Ratio | L1 |
| Z4D25-12GN Z4D25-24GN Z4D25-90GN |
4GN□K | 3～200 | 42.5 |
●Enter the gear ratio in the box (□) within the model name.
●Gear ratio 3~18, short case is possible (L1=32).
●Key●Keyway (The Key Is Included With The Gearhead)
●Shaft Section Of Round Shaft Type
Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.
●Decimal Gearhead
Can be connected to GN pinion shaft type
4GN10X
Weight：0.41kg
Brush DC Gear Motor
25W Brush DC Gear Motor
| Model | Voltage | Power | No-load Parameters | Load Parameters | Brush Life | Motor Weight | ||||||||||
| Speed | Current | Speed | Torque | Current | ||||||||||||
| V | W | r/min | A | r/min | mN.m | A | H | kg | ||||||||
| Z3D25-12□ | 12 | 25 | 3300 | 1.0Max. | 3000 | 80 | 3.5 | 2000 | 1.0 | |||||||
| Z3DW25-12□ | 12 | 25 | 3300 | 1.0Max. | 3000 | 80 | 3.5 | 2000 | 1.0 | |||||||
| Z3D25-24□ | 24 | 25 | 3200 | 0.5Max. | 2800 | 85 | 1.6 | 2000 | 1.0 | |||||||
| Z3DW25-24□ | 24 | 25 | 3200 | 0.5Max | 2800 | 85 | 1.6 | 2000 | 1.0 | |||||||
| Z3D25-90□ | 90 | 25 | 3100 | 0.3Max. | 2700 | 88 | 0.6 | 2000 | 1.0 | |||||||
| Z3DW25-90□ | 90 | 25 | 3100 | 0.3Max | 2700 | 88 | 0.6 | 2000 | 1.0 | |||||||
●Motor voltage, power and speed will be customized according to his requestment under the allowed circumstance of adoptable dimension.
●We use W after D in the model to express the external brush motor, such as Z2DW06-12GN. If no W, it means the standard internal brush motor. For external brush motor, you can
replce the brush directly. For internal ones, we need to disassembly the motor .
●Motor
| Type | Model | ||||
| Pinion Shaft | Round Shaft | ||||
| Lead Wire Type | Z3D25-12GN | Z3D25-12A | |||
| Z3DW25-12GN | Z3DW25-12A | ||||
| Z3D25-24GN | Z3D25-24A | ||||
| Z3DW25-24GN | Z3D25-24A | ||||
| Z3D25-90GN | Z3D25-90A | ||||
| Z3DW25-90GN | Z3DW25-90A | ||||
●Parallel Shaft Gearhead (Sold Separately)
| Gearhead Type | Gearhead Model | Gear Ratio |
| Long Life ●Low Noise |
3GN□K | 3、3.6、5、6、7.5、9、10、 12.5、15、18、20、25、30、 36、40、50、60、75、90、 100、120、150、180、200 |
| 3GN10XK(Decimal Gearhead) | ||
●Enter the gear ratio in the box (□) within the model name.
●Characteristic Curve Of Motor
●Wiring Diagram Of Motor
Standard length of lead wire: 300mm±10, model: Ul1015, type: AWG20; lead wire length, model will be customized by dient request meant under allowed circumstance of adoptable dimension.
●Gearheads are sold separately. Decimal gearheads are not available.
●Enter the gear ratio in the box (□) within the model name.
●The colored background (□) indicates the same rotating direction of the motor while the rotating direction of others are opposite.
●The speed is calculated by dividing the motor's synchronous speed by the gear ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 5N·m.
| Type | Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| Z3D25-24GN |
Speed r/min |
933 | 778 | 560 | 467 | 373 | 311 | 280 | 224 | 187 | 156 | 140 | 112 | 93 | 78 | 70 | 56 | 47 | 37 | 31 | 28 | 23 | 19 | 16 | 14 |
| 3GN□K | 0.21 | 0.25 | 0.35 | 0.41 | 0.52 | 0.62 | 0.69 | 0.86 | 1.04 | 1.24 | 1.24 | 1.55 | 1.86 | 2.24 | 2.49 | 3.11 | 3.73 | 4.66 | 5.00 | 5.00 | 5.00 | 5.00 | 5.00 | 5.00 | |
| 2.03 | 2.44 | 3.38 | 4.06 | 5.08 | 6.09 | 6.77 | 8.46 | 10.2 | 12.2 | 12.2 | 15.2 | 18.3 | 21.9 | 24.4 | 30.5 | 36.6 | 45.7 | 50.0 | 50.0 | 50.0 | 50.0 | 50.0 | 50.0 |
Mounting screws are included with gearhead.
●Lead Wiring Type
Weight：Motor：1.0kg Gearhead：0.55kg
| Motor Model | Gearhead Model | Gear Ratio | L1 |
| Z3D25-12GN Z3DW25-12GN Z3D25-24GN Z3DW25-24GN Z3D25-90GN Z3DW25-90GN |
3GN□K | 3～200 | 42 |
●Enter the gear ratio in the box (□) within the model name.
●Gear ratio 3~18, short case is possible (L1=32).
●Key●Keyway (The Key Is Included With The Gearhead)
●Shaft Section Of Round Shaft Type
Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.
●Decimal Gearhead
Can be connected to GN pinion shaft type
3GN10X
Weight：0.31kg
Brush DC Gear Motor
15W Brush DC Gear Motor
| Model | Voltage | Power | No-load Parameters | Load Parameters | Brush Life | Motor Weight | |||
| Speed | Current | Speed | Torque | Current | |||||
| V | W | r/min | A | r/min | mN.m | A | H | kg | |
| Z2D15-12□ | 12 | 15 | 3200 | 0.8Max. | 2950 | 48 | 2.0 | 2000 | 0.9 |
| Z2DW15-12□ | 12 | 15 | 3200 | 0.8Max. | 2950 | 48 | 2.0 | 2000 | 0.9 |
| Z2D15-24□ | 24 | 15 | 3300 | 0.4Max. | 3000 | 48 | 1.0 | 2000 | 0.9 |
| Z2DW15-24□ | 24 | 15 | 3300 | 0.4Max. | 3000 | 48 | 1.0 | 2000 | 0.9 |
| Z2D15-90□ | 90 | 15 | 3200 | 0.2Max. | 3000 | 48 | 0.4 | 2000 | 0.9 |
| Z2DW15-90□ | 90 | 6 1 |
3200 | 0.2Max. | 3000 | 48 | 0.4 | 2000 | 0.9 |
●Motor voltage, power and speed will be customized according to his request under the allowed circumstance of adoptable dimension.
●We use W after D in the model to express the external brush motor, such as Z2DW06-12GN. If no W, it means the standard internal brush motor. For external brush motor, you can
replce the brush directly. For internal ones, we need to disassembly the motor .
●Motor
| Type | Model | |
| Pinion Shaft | Round Shaft | |
| Lead Wire Type | Z2D15-12GN | Z2D15-12A |
| Z2DW15-12GN | Z2DW15-12A | |
| Z2D15-24GN | Z2D15-24A | |
| Z2DW15-24GN | Z2D15-24A | |
| Z2D15-90GN | Z2D15-90A | |
| Z2DW15-90GN | Z2DW15-90A | |
●Parallel Shaft Gearhead (Sold Separately)
| Gearhead Type | Gearhead Model | Gear Ratio |
| Long Life ● Low Noise | 2GN | 3、3.6、5、6、7.5、9、10、 12.5、15、18、20、25、30、 36、40、50、60、75、90、 100、120、150、180、200 |
| 2GN10XK(Decimal Gearhead) | ||
●Enter the gear ratio in the box (□) within the model name.
●Characteristic Curve Of Motor
●Wiring Diagram Of Motor
Standard length of lead wire: 300mm±10, model: Ul1015, type: AWG20; lead wire length, model will be customized by dient request meant under allowed circumstance of adoptable dimension.
●Gearheads are sold separately. Decimal gearheads are not available.
●Enter the gear ratio in the box (□) within the model name.
●The colored background (□) indicates the same rotating direction of the motor while the rotating direction of others are opposite.
●The speed is calculated by dividing the motor's synchronous speed by the gear ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 3N·m.
| Type | Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| Z2D15-24GN |
Speed r/min |
1000 | 833 | 600 | 500 | 400 | 333 | 300 | 240 | 200 | 167 | 150 | 120 | 100 | 83 | 75 | 60 | 50 | 40 | 33 | 30 | 25 | 20 | 17 | 15 |
| 2GN□K | 0.12 | 0.14 | 0.19 | 0.23 | 0.29 | 0.35 | 0.39 | 0.48 | 0.58 | 0.70 | 0.70 | 0.87 | 1.04 | 1.25 | 1.39 | 1.74 | 1.88 | 2.35 | 2.82 | 3.00 | 3.00 | 3.00 | 3.00 | 3.00 | |
| 1.14 | 1.36 | 1.90 | 2.27 | 2.84 | 3.41 | 3.79 | 4.74 | 5.69 | 6.82 | 6.82 | 8.53 | 0.23 | 12.28 | 13.65 | 17.1 | 18.4 | 23.0 | 27.6 | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 |
Mounting screws are included with gearhead.
●Lead Wiring Type
Weight：Motor：0.9kg Gearhead：0.4kg
| Motor Model | Gearhead Model | Gear Ratio | L1 |
| Z2D15-12GN Z2DW15-12GN Z2D15-24GN Z2DW15-24GN Z2D15-90GN Z2DW15-90GN |
2GN□K | 3～200 | 41 |
●Enter the gear ratio in the box (□) within the model name.
●Gear ratio 3~18, short case is possible (L1=32).
●Shaft Section Of Round Shaft Type
Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.
●Decimal Gearhead
Can be connected to GN pinion shaft type
2GN10X
Weight：0.24kg
Brush DC Gear Motor
10W Brush DC Gear Motor
| Model | Voltage | Power | No-load Parameters | Load Parameters | Brush Life | Motor Weight | |||
| Speed | Current | Speed | Torque | Current | |||||
| V | W | r/min | A | r/min | mN.m | A | H | kg | |
| Z2D10-12□ | 12 | 10 | 3200 | 1.0Max. | 2800 | 34 | 2.0 | 2000 | 0.7 |
| Z2DW10-12□ | 12 | 10 | 3200 | 1.0Max. | 2800 | 34 | 2.0 | 2000 | 0.7 |
| Z2D10-24□ | 24 | 10 | 3300 | 0.5Max. | 3000 | 32 | 0.9 | 2000 | 0.7 |
| Z2DW10-24□ | 24 | 10 | 3300 | 0.5Max. | 3000 | 32 | 0.9 | 2000 | 0.7 |
| Z2D10-90□ | 90 | 10 | 3200 | 0.3Max. | 2800 | 34 | 0.6 | 2000 | 0.7 |
| Z2DW10-90□ | 90 | 10 | 3200 | 0.3Max. | 2800 | 34 | 0.6 | 2000 | 0.7 |
●Motor voltage, power and speed will be customized according to his requestment under the allowed circumstance of adoptable dimension.
●We use W after D in the model to express the external brush motor, such as Z2DW06-12GN. If no W, it means the standard internal brush motor. For external brush motor, you can
replce the brush directly. For internal ones, we need to disassembly the motor .
●Motor
| Type | Model | |
| Pinion Shaft | Round Shaft | |
| Lead Wire Type | Z2D10-12GN | Z2D10-12A |
| Z2DW10-12GN | Z2DW10-12A | |
| Z2D10-24GN | Z2D10-24A | |
| Z2DW10-24GN | Z2D10-24A | |
| Z2D10-90GN | Z2D10-90A | |
| Z2DW10-90GN | Z2DW10-90A | |
●Parallel Shaft Gearhead (Sold Separately)
| Gearhead Type | Gearhead Model | Gear Ratio |
| Long Life ● Low Noise | 2GN□K | 3、3.6、5、6、7.5、9、10、 12.5、15、18、20、25、30、 36、40、50、60、75、90、 100、120、150、180、200 |
| 2GN10XK(Decimal Gearhead) | ||
● Enter the gear ratio in the box (□) within the model name
●Characteristic Curve Of Motor
●Wiring Diagram Of Motor
Standard length of lead wire: 300mm±10, model: Ul1015, type: AWG20; lead wire length, model will be customized by dient request meant under allowed circumstance of adoptable dimension.
●Gearheads are sold separately. Decimal gearheads are not available.
●Enter the gear ratio in the box (□) within the model name.
●The colored background (□) indicates the same rotating direction of the motor while the rotating direction of others are opposite.
●The speed is calculated by dividing the motor's synchronous speed by the gear ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 3N·m.
| Type | Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| Z2D10-24GN |
Speed r/min |
1000 | 833 | 600 | 500 | 400 | 333 | 300 | 240 | 200 | 167 | 150 | 120 | 100 | 83 | 75 | 60 | 50 | 40 | 33 | 30 | 25 | 20 | 17 | 15 |
| 2GN□K | 0.08 | 0.09 | 0.13 | 0.15 | 0.19 | 0.23 | 0.26 | 0.32 | 0.39 | 0.46 | 0.46 | 0.58 | 0.7 | 0.84 | 0.93 | 1.16 | 1.25 | 1.75 | 1.88 | 2.09 | 2.51 | 3.00 | 3.00 | 3.00 | |
| 0.76 | 0.91 | 1.26 | 1.52 | 1.9 | 2.27 | 2.53 | 3.16 | 3.79 | 4.55 | 4.55 | 5.69 | 6.82 | 8.19 | 9.1 | 11.4 | 12.3 | 15.4 | 18.4 | 20.5 | 24.6 | 30 | 30 | 30 |
Mounting screws are included with gearhead.
●Lead Wiring Type
Weight：Motor：0.7kg Gearhead：0.4kg
| Motor Model | Gearhead Model | Gear Ratio | L1 |
| Z2D10-12GN Z2DW10-12GN Z2D10-24GN Z2DW10-24GN Z2D10-90GN Z2DW10-90GN |
2GN□K | 3～200 | 41 |
●Enter the gear ratio in the box (□) within the model name.
●Gear ratio 3~18, short case is possible (L1=32).
●Shaft Section Of Round Shaft Type
Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.
●Decimal Gearhead
Can be connected to GN pinion shaft type
2GN10X
Weight：0.24kg
Brush DC Gear Motor
6W Brush DC Gear Motor
| Model | Voltage | Power | No-load Parameters | Load Parameters | Brush Life | Motor Weight | ||||||||||
| Speed | Current | Speed | Torque | Current | ||||||||||||
| V | W | r/min | A | r/min | mN.m | A | H | kg | ||||||||
| Z2D06-12□ | 12 | 6 | 3200 | 0.6Max. | 2950 | 19 | 0.8 | 2000 | 0.6 | |||||||
| Z2DW06-12□ | 12 | 6 | 3200 | 0.6Max. | 2950 | 19 | 0.8 | 2000 | 0.6 | |||||||
| Z2D06-24□ | 24 | 6 | 3200 | 0.3Max | 2950 | 19 | 0.5 | 2000 | 0.6 | |||||||
| Z2DW06-24□ | 24 | 6 | 3200 | 0.3Max. | 2950 | 19 | 0.5 | 2000 | 0.6 | |||||||
| Z2D06-90□ | 90 | 6 | 3000 | 0.2Max. | 2800 | 20 | 0.3 | 2000 | 0.6 | |||||||
| Z2DW06-90□ | 90 | 6 | 3000 | 0.2Max. | 2800 | 20 | 0.3 | 2000 | 0.6 | |||||||
●Motor voltage, power and speed will be customized according to his requestment under the allowed circumstance of adoptable dimension.
●We use W after D in the model to express the external brush motor, such as Z2DW06-12GN. If no W, it means the standard internal brush motor. For external brush motor, you can
replce the brush directly. For internal ones, we need to disassembly the motor .
●Motor
| Type | Model | ||||
| Pinion Shaft | Round Shaft | ||||
| Lead Wire Type | Z2D06-12GN | Z2D06-12A | |||
| Z2DW06-12GN | Z2DW06-12A | ||||
| Z2D06-24GN | Z2D06-24A | ||||
| Z2DW06-24GN | Z2D06-24A | ||||
| Z2D06-90GN | Z2D06-90A | ||||
| Z2DW06-90GN | Z2DW06-90A | ||||
●Parallel Shaft Gearhead (Sold Separately)
| Gearhead Type | Gearhead Model | Gear Ratio |
| Long Life ● Low Noise | 2GNDK | 3、3.6、5、6、7.5、9、10、 12.5、15、18、20、25、30、 36、40、50、60、75、90、 100、120、150、180、200 |
| 2GN10XK(Decimal Gearhead) | ||
● Enter the gear ratio in the box (□) within the model name
●Characteristic Curve Of Motor
●Wiring Diagram Of Motor
Stanclard length of lead wire: 300mm±10, model: Ul1015, type: AWG20; lead wire length, model will be customerised by dient request meant under allowed circumstance of adoptable dimension.
●Gearheads are sold separately. Decimal gearheads are not available.
●Enter the gear ratio in the box (□) within the model name.
●The colored background (□) indicates the same rotating direction of the motor while the rotating direction of others are opposite.
●The speed is calculated by dividing the motor's synchronous speed by the gear ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
●To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 3N·m.
| Type | Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| Z2D06-24GN |
Speed r/min |
983 | 819 | 590 | 492 | 393 | 328 | 295 | 236 | 197 | 164 | 148 | 118 | 98 | 82 | 74 | 59 | 49 | 39 | 33 | 30 | 25 | 20 | 16 | 15 |
| 2GN□K | 0.05 | 0.06 | 0.08 | 0.09 | 0.12 | 0.14 | 0.16 | 0.20 | 0.24 | 0.28 | 0.28 | 0.35 | 0.42 | 0.51 | 0.57 | 0.71 | 0.76 | 0.96 | 1.15 | 1.27 | 1.53 | 1.91 | 2.29 | 2.55 | |
| 0.46 | 0.56 | 0.77 | 0.93 | 1.16 | 1.39 | 1.54 | 1.93 | 2.31 | 2.78 | 2.78 | 3.47 | 4.16 | 5.00 | 5.55 | 6.94 | 7.49 | 9.37 | 11.2 | 12.5 | 15.0 | 18.7 | 22.5 | 25.0 |
Mounting screws are included with gearhead.
●Lead Wiring Type
Weight：Motor：0.6kg Gearhead：0.4kg
| Motor Model | Gearhead Model | Gear Ratio | L1 |
| Z2D06-12GN Z2DW06-12GN Z2D06-24GN Z2DW06-24GN Z2D06-90GN Z2DW06-90GN |
2GN□K | 3～200 | 41 |
●Enter the gear ratio in the box (□) within the model name.
●Gear ratio 3~18, short case is possible (L1=32).
●Shaft Section Of Round Shaft Type
Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.
●Decimal Gearhead
Can be connected to GN pinion shaft type
2GN10X
Weight：0.24kg
