AC Gear Motor

6W Reversible AC Motor/Gear Motor

PDF Drawing + Contact us

Model •Type Lead Wire Type		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Pinion Shaft	Round Shaft
2RK6GN-A	2RK6A-A	6	1ph 100	50	0.265	60	48	1200	4.0
				60	0.232	55	40	1450
2RK6GN-E	2RK6A-E	6	1ph 110	50	0.185	45	40	1450	2.5
			1ph 120	60	0.200
2RK6GN-C	2RK6A-C	6	1ph 220	50	0.145	55	48	1200	1.0
			1ph 230	60	0.150
2RK6GN-H	2RK6A-H	6	1ph 220	50	0.145	40	60	1450	1.0
			1ph 230	60	0.150

●Values shown for rated torque and starting torque are measured for operation without the friction brake installed.

●When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.

●Contains a built-in thermal protector(automatic return). If a motor overheats for any reason, the thermal protector is opened and the motor stops.

●When the motor temperature drops, the thermal protector closes and the motor restarts. Be sure to turn the motor off before inspecting.

●Note:"-A"it means the voltage 110v, the assembly capacitor vaule it is according the label.

●Motor

Type	Model
Type	Pinion Shaft	Round Shaft
Lead Wire Type	2RK6GN-A	2RK6A-A
	2RK6GN-E	2RK6A-E
	2RK6GN-C	2RK6A-C
	2RK6GN-H	2RK6A-H

●Parallel Shaft Gearhead (Sold Separately)

Gearhead Type	Gearhead Model	Gear Ratio
Long Life•Low Noise	2GN□K	3、3.6、5、 6、7.5、9、 12.5、15、18、25、30、 36、 50、 60、 75、90、100、 120、 150、 180、 200
Long Life•Low Noise	2GN10XK ( Decimal Gearhead )

•Enter the gear ratio in the box(□)within the model name

•Gearhead and mid-gearbox can be sold separately.

•Enter the gear ratio in the box（口）within the model name.

•The speed is calculated by dividing the motor's synchronous speed（50Hz：1500r/min，60Hz：1800/min）by the gear ratio.The actual speed is 2%~ 20% less than the displayed value，depending on the size of the load.

•To reduce the speed beyond the gear ratio in the table，attach a decimal gearhead(gear ratio：10)between the gearhead and motor.In that case，the permissible torque is 3 N.m.

Type Motor/Gearhead	Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
	Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
	Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
2RK6GN-A 2RK6GN-E 2RK6GN-C 2RK6GN-H	2GN口K	50Hz	0.12	0.14	0.19	0.23	0.29	0.35	0.49	0.58	0.70	0.88	1.1	1.3	1.6	1.9	2.4	2.9	3	3	3	3	3
		50Hz	1.22	1.43	1.94	2.35	2.96	3.57	5.0	5.92	7.14	8.98	11.2	13.3	16.3	19.4	24.5	29.6	30	30	30	30	30
		60Hz	0.10	0.12	0.16	0.19	0.24	0.29	0.41	0.49	0.58	0.73	0.88	1.1	1.3	1.6	2.0	2.4	2.6	3	3	3	3
		60Hz	1.02	1.22	1.63	1.94	2.45	2.96	4.18	5.0	5.92	7.45	8.98	11.2	13.3	16.3	20.4	24.5	2.65	30	30	30	30

Mounting screws are included with gearhead.

•Lead Wiring Type

Weight：Motor：0.8kg Gearhead：0.4kg

Motor Model

Gearhead Model

Gear Ratio

L1

2RK6GN-A

2RK6GN-E

2RK6GN-C

2RK6GN-H

2GN□K

3-18

32

25-200

41.5

• Shaft Section Of Round Shaft Type

Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.

•Decimal Gearhead

Can be connected to GN pinion shaft type

2GN10XK

Weight : 0.24kg

Model		Capacitor Model	L	W	H
Pinion Shaft	Round Shaft	Capacitor Model	L	W	H
2RK6GN-A	2RK6A-A	ZD40CFAUL	47	17	31
2RK6GN-E	2RK6A-E	ZD25CFAUL	38	17	28
2RK6GN-C	2RK6A-C	ZD10CFAUL	36	11	22

•Note: Conventional capacitor is a lead wire type.

•The direction of motor rotation is as viewed from the shaft end of motor. CW represents the clockwise direction, while CCW represents the counterclockwise direction.

•Name indicated in the list is pinion shaft type, also valid for the equivalent round shaft type.

Note：

Change the direction of single-phase motor rotation only after bring the motor to a stop.

If an attempt is made to change the direction of rotation while the motor is rotating, motor may ignore reversing command or change its direction of rotation after some delay.

AC Gear Motor

200W Induction AC Motor/Gear Motor

PDF Drawing + Contact us

Model · Type Upper: Pinion Shaft Below: Round Shaft		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Lead Wire Type Dimensions①	Terminal Box Type Dimensions②
6IK200GU-AF	6IK200GU-AFT	200	1ph 100	50	3.20	900	1520	1250	45
				60	3.50		1230	1550
6IK200GU-EF	6IK200GU-EFT	200	1ph 110	60	2.75	850	1230	1550	35
			1ph 120		2.65
6IK200GU-CF	6IK200GU-CFT	200	1ph 220	50	1.40	1000	1520	1250	10
			1ph 230
6IK200GU-HF	6IK200GU-HFT	200	1ph 220	60	1.40	900	1230	1550	10
			1ph 230
6IK200GU-SF	6IK200GU-SFT	200	3ph 220	50	1.20	3400	1520	1250	-
				60	1.00	2700	1230	1550
6IK200GU-S3F	6IK200GU-S3FT	200	3ph 380	50	0.69	3400	1520	1250	-
				60	0.58	2700	1230	1550

● When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.

● Note: "-A" it means the voltage 110V, the assembly capacitor vaule it is according the labe.

● Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

● Enter the gear ratio in the box (□) within the model name. The colored background(□)indicates the same rotating direction of the motor while the rotating direction of others are opposite.

● The speed is calculated by diving the motor’s synchronous speed (50Hz:1500r/min、60Hz:1800r/min) by the gear ratio. The actual speed is 2%~20% less than the displayed value,
depending on the size of the load.

● To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 60N·m.

Type Motor/Gearhead		Gear Ratio		7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
6IK200GU-AF□ 6IK200GU-EF□ 6IK200GU-CF□ 6IK200GU-HF□ 6IK200GU-SF□ 6IK200GU-S3F□	6GU□RC 6GU□RT	Allowance Torque	50Hz	9.28	11.1	13.9	16.7	20.1	25.2	30.3	36.3	50.4	60.0	60.0	60.0	60.0	60.0	60.0	60.0
			50Hz	94.7	114	142	171	205	257	30.9	370	515	600	600	600	600	600	600	600
			60Hz	7.49	8.98	11.2	13.5	16.2	20.3	24.4	29.3	40.7	48.8	60.0	60.0	60.0	60.0	60.0	60.0
			60Hz	76.4	91.7	115	138	165	207	249	299	415	498	600	600	600	600	600	600

6IK200GU-AF□/6GU□RC 6IK200GU-CF/6GU□RC 6IK200GU-SF□/6GU□RC
6IK200GU-EF□/6GU□RC 6IK200GU-HF/6GU□RC 6IK200GU-S3F□/6GU□RC

6IK200GU-AF□/6GU□RT 6IK200GU-CF/6GU□RT 6IK200GU-SF□/6GU□RT
6IK200GU-EF□/6GU□RT 6IK200GU-HF/6GU□RT 6IK200GU-S3F□/6GU□RT

AC Gear Motor

140W Induction AC Motor/Gear Motor

PDF Drawing + Contact us

Model · Type Upper: Pinion Shaft Below: Round Shaft		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Lead Wire Type Dimensions①	Terminal Box Type Dimensions②
6IK140GU-AF	6IK140GU-AFT	140	1ph 100	50	2.70	700	1080	1250	35
				60	3.00		870	1550
6IK140GU-EF	6IK140GU-EFT	140	1ph 110	60	1.80	700	850	1600	25
			1ph 120		1.95
6IK140GU-CF	6IK140GU-CFT	140	1ph 220	50	1.05	850	1040	1350	10
			1ph 230		1.15
6IK140GU-HF	6IK140GU-HFT	140	1ph 220	60	1.05	750	850	1600	10
			1ph 230		1.15
6IK140GU-SF	6IK140GU-SFT	140	3ph 220	50	0.85	2700	1080	1250	-
				60	0.75	2200	870	1550
6IK140GU-S3F	6IK140GU-S3FT	140	3ph 380	50	0.49	2700	1080	1250	-
				60	0.43	2200	870	1550

● When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.

● Note: "-A" it means the voltage 110V, the assembly capacitor vaule it is according the labe.

● Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

● Enter the gear ratio in the box (□) within the model name. The colored background(□)indicates the same rotating direction of the motor while the rotating direction of others are opposite.

● The speed is calculated by diving the motor’s synchronous speed (50Hz:1500r/min、60Hz:1800r/min) by the gear ratio. The actual speed is 2%~20% less than the displayed value,
depending on the size of the load.

● To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 60N·m.

Type Motor/Gearhead		Gear Ratio		7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
6IK140GU-AF□ 6IK140GU-EF□ 6IK140GU-CF□ 6IK140GU-HF□ 6IK140GU-SF□ 6IK140GU-S3F□	6GU□RC 6GU□RT	Allowance Torque	50Hz	4.97	6.63	9.21	11.0	13.3	18.4	22.1	26.5	33.1	39.8	49.7	59.6	60.0	60.0	60.0	60.0
			50Hz	50.7	67.6	93.9	113	135	188	225	271	338	406	507	600	600	600	600	600
			60Hz	4.01	5.34	7.42	8.91	10.7	14.8	17.8	21.4	26.7	32.1	40.1	48.1	53.4	60.0	60.0	60.0
			60Hz	40.9	54.5	75.8	90.9	109	152	182	218	273	327	409	491	545	600	600	600

6IK140GU-AF□/6GU□RC 6IK140GU-CF□/6GU□RC 5IK140GU-SF□/6GU□RC
6IK140GU-EF□/6GU□RC 6IK140GU-HF□/6GU□RC 5IK140GU-S3F□/6GU□RC

6IK140GU-AF□/6GU□RT 6IK140GU-CF□/6GU□RT 5IK140GU-SF□/6GU□RT
6IK140GU-EF□/6GU□RT 6IK140GU-HF□/6GU□RT 5IK140GU-S3F□/6GU□RT

AC Gear Motor

120W Induction AC Motor/Gear Motor

PDF Drawing + Contact us

Model · Type Upper: Pinion Shaft Below: Round Shaft		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Lead Wire Type Dimensions①	Terminal Box Type Dimensions②
6IK120GU-AF	6IK120GU-AFT	120	1ph 100	50	2.10	600	930	1250	30
				60	2.50		750	1550
6IK120GU-EF	6IK120GU-EFT	120	1ph 110	60	1.70	600	750	1550	20
			1ph 120		1.80
6IK120GU-CF	6IK120GU-CFT	120	1ph 220	50	0.95	750	930	1250	8.0
			1ph 230
6IK120GU-HF	6IK120GU-HFT	120	1ph 220	60	0.95	700	750	1550	8.0
			1ph 230		1.00
6IK120GU-SF	6IK120GU-SFT	120	3ph 220	50	0.75	2200	890	1300
				60	0.70	2000	730	1600
6IK120GU-S3F	6IK120GU-S3FT	120	3ph 380	50	0.43	2200	890	1300
				60	0.40	2000	730	1600

● When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.

● Note: "-A" it means the voltage 110V, the assembly capacitor vaule it is according the labe.

● Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

● Enter the gear ratio in the box (□) within the model name. The colored background(□)indicates the same rotating direction of the motor while the rotating direction of others are opposite.

● The speed is calculated by diving the motor’s synchronous speed (50Hz:1500r/min、60Hz:1800r/min) by the gear ratio. The actual speed is 2%~20% less than the displayed value,
depending on the size of the load.

● To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 60N·m.

Type Motor/Gearhead		Gear Ratio		7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
6IK120GU-AF□ 6IK120GU-EF□ 6IK120GU-CF□ 6IK120GU-HF□ 6IK120GU-SF□ 6IK120GU-S3F□	6GU□RC 6GU□RT	Allowance Torque	50Hz	4.26	5.68	7.89	9.47	11.4	15.8	18.9	22.7	28.4	34.1	42.6	51.1	56.8	60.0	60.0	60.0
			50Hz	43.5	58.0	80.5	96.6	116	161	193	232	290	348	435	522	580	600	600	600
			60Hz	3.44	4.58	6.36	7.64	9.16	12.7	15.3	18.3	22.9	27.5	34.4	41.2	45.8	55.0	60.0	60.0
			60Hz	35.1	46.7	64.9	77.9	93.5	130	156	187	234	280	351	421	467	561	600	600

6IK120GU-AF□/6GU□RC 6IK120GU-CF□/6GU□RC 6IK120GU-SF□/6GU□RC
6IK120GU-EF□/6GU□RC 6IK120GU-HF□/6GU□RC 6IK120GU-S3F□/6GU□RC

6IK120GU-AF□/6GU□RT 6IK120GU-CF□/6GU□RT 5IK120GU-SF□/6GU□RT
6IK120GU-EF□/6GU□RT 6IK120GU-HF□/6GU□RT 5IK120GU-S3F□/6GU□RT

AC Gear Motor

120W Induction AC Motor/Gear Motor

PDF Drawing + Contact us

Model · Type Upper: Pinion Shaft Below: Round Shaft		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Lead Wire Type Dimensions①	Terminal Box Type Dimensions②
5IK120GU-AF	5IK120GU-AFT	120	1ph 100	50	2.10	600	930	1250	30
				60	2.50		750	1550
5IK120GU-EF	5IK120GU-EFT	120	1ph 110	60	1.65	600	750	1550	25
			1ph 120		1.80
5IK120GU-CF	5IK120GU-CFT	120	1ph 220	50	1.00	650	930	1250	7.0
			1ph 230		0.95
5IK120GU-HF	5IK120GU-HFT	120	1ph 220	60	1.00	600	750	1550	7.0
			1ph 230		0.95
5IK120GU-SF	5IK120GU-SFT	120	3ph 220	50	0.70	1850	930	1250	-
				60	0.60	1600	750	1550
5IK120GU-S3F	5IK120GU-S3FT	120	3ph 380	50	0.40	1850	930	1250	-
				60	0.35	1600	750	1550

● When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.

● Note: "-A" it means the voltage 110V, the assembly capacitor vaule it is according the labe.

● Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

● Enter the gear ratio in the box (□) within the model name. The colored background(□)indicates the same rotating direction of the motor while the rotating direction of others are opposite.

● The speed is calculated by diving the motor’s synchronous speed (50Hz:1500r/min、60Hz:1800r/min) by the gear ratio. The actual speed is 2%~20% less than the displayed value,
depending on the size of the load.

● To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 20N·m.

Type Motor/Gearhead		Gear Ratio		7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
5IK120GU-AF□ 5IK120GU-EF□ 5IK120GU-CF□ 5IK120GU-HF□ 5IK120GU-SF□ 5IK120GU-S3F□	5GU□RC 5GU□RT	Allowance Torque	50Hz	4.73	5.68	7.89	9.47	11.4	15.8	18.9	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
			50Hz	48.3	58.0	80.5	96.6	116	161	193	200	200	200	200	200	200	200	200	200
			60Hz	3.82	4.58	6.36	7.64	9.16	12.7	15.3	16.5	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
			60Hz	39.0	46.7	64.9	77.9	93.5	130	156	168	200	200	200	200	200	200	200	200

5IK120GU-AF□/5GU□RC 5IK120GU-CF□/5GU□RC 5IK120GU-SF□/5GU□RC
5IK120GU-EF□/5GU□RC 5IK120GU-HF□/5GU□RC 5IK120GU-S3F□/5GU□RC

5IK120GU-AF□/5GU□RT 5IK120GU-CF□/5GU□RT 5IK120GU-SF□/5GU□RT
5IK120GU-EF□/5GU□RT 5IK120GU-HF□/5GU□RT 5IK120GU-S3F□/5GU□RT

AC Gear Motor

90W Induction AC Motor/Gear Motor

PDF Drawing + Contact us

Model · Type Upper: Pinion Shaft Below: Round Shaft		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Lead Wire Type Dimensions①	Terminal Box Type Dimensions②
5IK90GU-AF	5IK90GU-AFT	90	1ph 100	50	1.55	450	700	1250	25
				60	1.85		570	1550
5IK90GU-EF	5IK90GU-EFT	90	1ph 110	60	1.40	500	570	1550	20
			1ph 120		1.45
5IK90GU-CF	5IK90GU-CFT	90	1ph 220	50	0.72	450	700	1250	5.0
			1ph 230		0.70
5IK90GU-HF	5IK90GU-HFT	90	1ph 220	60	0.71	450	570	1550	5.0
			1ph 230		0.75
5IK90GU-SF	5IK90GU-SFT	90	3ph 220	50	0.60	1350	700	1250
				60	0.55	1100	570	1550
5IK90GU-S3F	5IK90GU-S3FT	90	3ph 380	50	0.35	1350	700	1250
				60	0.32	1100	570	1550

● When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.

● Note: "-A" it means the voltage 110V, the assembly capacitor vaule it is according the labe.

● Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

● Enter the gear ratio in the box (□) within the model name. The colored background(□)indicates the same rotating direction of the motor while the rotating direction of others are opposite.

● The speed is calculated by diving the motor’s synchronous speed (50Hz:1500r/min、60Hz:1800r/min) by the gear ratio. The actual speed is 2%~20% less than the displayed value,
depending on the size of the load.

● To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 20N·m.

Type Motor/Gearhead		Gear Ratio		7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
5IK90GU-AF□ 5IK90GU-EF□ 5IK90GU-CF□ 5IK90GU-HF□ 5IK90GU-SF□ 5IK90GU-S3F□	5GU□RC 5GU□RT	Allowance Torque	50Hz	3.55	4.26	5.92	7.10	8.52	11.8	14.2	15.3	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
			50Hz	36.2	43.5	60.4	72.5	87.0	121	145	157	200	200	200	200	200	200	200	200
			60Hz	2.86	3.44	4.77	5.73	6.87	9.54	11.5	12.4	17.2	20.0	20.0	20.0	20.0	20.0	20.0	20.0
			60Hz	29.2	35.1	48.7	58.4	70.1	97.4	117	126	175	200	200	200	200	200	200	200

5IK90GU-AF□/5GU□RC 5IK90GU-CF□/5GU□RC 5IK90GU-SF□/5GU□RC
5IK90GU-EF□/5GU□RC 5IK90GU-HF□/5GU□RC 5IK90GU-S3F□/5GU□RC

5IK90GU-AF□/5GU□RT 5IK90GU-CF□/5GU□RT 5IK90GU-SF□/5GU□RT
5IK90GU-EF□/5GU□RT 5IK90GU-HF□/5GU□RT 5IK90GU-S3F□/5GU□RT

AC Gear Motor

60W Induction AC Motor/Gear Motor

PDF Drawing + Contact us

Model · Type Upper: Pinion Shaft Below: Round Shaft		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Lead Wire Type Dimensions①	Terminal Box Type Dimensions②
5IK60GU-AF	5IK60GU-AFT	60	1ph 100	50	1.00	320	470	1250	20
				60	1.10		380	1550
5IK60GU-EF	5IK60GU-EFT	60	1ph 110	60	0.80	300	380	1550	12
			1ph 120		0.85
5IK60GU-CF	5IK60GU-CFT	60	1ph 220	50	0.50	340	470	1250	4.0
			1ph 230		0.55
5IK60GU-HF	5IK60GU-HFT	60	1ph 220	60	0.50	340	380	1550	4.0
			1ph 230		0.55
5IK60GU-SF	5IK60GU-SFT	60	3ph 220	50	0.45	1000	470	1250	-
				60	0.40	800	380	1550
5IK60GU-S3F	5IK60GU-S3FT	60	3ph 380	50	0.26	1000	470	1250	-
				60	0.23	800	380	1550

● When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.

● Note: "-A" it means the voltage 110V, the assembly capacitor vaule it is according the labe.

● Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

● Enter the gear ratio in the box (□) within the model name. The colored background(□)indicates the same rotating direction of the motor while the rotating direction of others are opposite.

● The speed is calculated by diving the motor’s synchronous speed (50Hz:1500r/min、60Hz:1800r/min) by the gear ratio. The actual speed is 2%~20% less than the displayed value,
depending on the size of the load.

● To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 20N·m.

Type Motor/Gearhead		Gear Ratio		7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
5IK60GU-AF□ 5IK60GU-EF□ 5IK60GU-CF□ 5IK60GU-HF□ 5IK60GU-SF□ 5IK60GU-S3F□	5GUD□RC 5GUD□RT	Allowance Torque	50Hz	2.37	2.84	3.95	4.73	5.68	7.89	9.47	10.2	14.2	17.0	20.0	20.0	20.0	20.0	20.0	20.0
			50Hz	24.2	29.0	40.3	48.3	58.0	80.5	96.6	104	145	174	200	200	200	200	200	200
			60Hz	1.91	2.29	3.18	3.82	4.58	6.36	7.64	8.25	11.5	13.7	17.2	20.0	20.0	20.0	20.0	20.0
			60Hz	19.48	23.37	32.46	38.96	46.75	64.93	77.92	84.1	117	140	175	200	200	200	200	200

5IK60GU-AF□/5GU□RC 5IK60GU-CF□/5GU□RC 5IK60GU-SF□/5GU□RC
5IK60GU-EF□/5GU□RC 5IK60GU-HF□/5GU□RC 5IK60GU-S3F□/5GU□RC

5IK60GU-AF□/5GU□RT 5IK60GU-CF□/5GU□RT 5IK60GU-SF□/5GU□RT
5IK60GU-EF□/5GU□RT 5IK60GU-HF□/5GU□RT 5IK60GU-S3F□/5GU□RT

AC Gear Motor

40W Induction AC Motor/Gear Motor

PDF Drawing + Contact us

Model · Type Upper: Pinion Shaft Below: Round Shaft		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Lead Wire Type Dimensions①	Terminal Box Type Dimensions②
5IK40GU-A	5IK40GU-AT	40	1ph 100	50	0.65	220	315	1250	12
				60	0.70		260	1550
5IK40GU-E	5IK40GU-ET	40	1ph 110	60	0.55	200	260	1550	8.0
			1ph 120		0.60
5IK40GU-C	5IK40GU-CT	40	1ph 220	50	0.35	220	315	1250	2.5
			1ph 230		0.40
5IK40GU-H	5IK40GU-HT	40	1ph 220	60	0.35	200	260	1550	2.5
			1ph 230		0.40
5IK40GU-S	5IK40GU-ST	40	3ph 220	50	0.30	800	315	1250	-
				60	0.25	660	250	1550
5IK40GU-S3	5IK40GU-S3T	40	3ph 280	50	0.17	800	315	1250	-
				60	0.14	660	250	1550

● When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.

● Note: "-A" it means the voltage 110V, the assembly capacitor vaule it is according the labe.

● Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

● Enter the gear ratio in the box (□) within the model name. The colored background(□)indicates the same rotating direction of the motor while the rotating direction of others are opposite.

● The speed is calculated by diving the motor’s synchronous speed (50Hz:1500r/min、60Hz:1800r/min) by the gear ratio. The actual speed is 2%~20% less than the displayed value,
depending on the size of the load.

● To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 20N·m.

Type Motor/Gearhead		Gear Ratio		7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
5IK40GU-A□ 5IK40GU-E□ 5IK40GU-C□ 5IK40GU-H□ 5IK40GU-S□ 5IK40GU-S3□	5GU□RC 5GU□RT	Allowance Torque	50Hz	1.58	1.89	2.63	3.16	3.79	5.26	6.31	6.80	9.50	11.4	14.2	17.0	18.9	20.0	20.0	20.0
			50Hz	16.1	19.3	26.8	32.2	38.6	53.7	64.4	70.0	97.0	116	145	174	193	200	200	200
			60Hz	1.27	1.53	2.12	2.55	3.05	4.24	5.09	5.50	7.64	9.16	11.5	13.7	15.3	18.3	20.0	20.0
			60Hz	13.0	15.6	21.6	26.0	31.2	43.3	51.9	56.1	77.9	93.5	117	140	156	187	200	200

5IK40GU-A□/5GU□RC 5IK40GU-C□/5GU□RC 5IK40GU-S□/5GU□RC
5IK40GU-E□/5GU□RC 5IK40GU-H□/5GU□RC 5IK40GU-S3□/5GU□RC

5IK40GU-A□/5GU□RT 5IK40GU-C□/5GU□RT 5IK40GU-S□/5GU□RT
5IK40GU-E□/5GU□RT 5IK40GU-H□/5GU□RT 5IK40GU-S3□/5GU□RT

AC Gear Motor

25W Induction AC Motor/Gear Motor

PDF Drawing + Contact us

Model · Type Upper: Pinion Shaft Below: Round Shaft		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Lead Wire Type Dimensions①	Terminal Box Type Dimensions②
4IK25GN-A	4IK25GN-AT	25	1ph 100	50	0.500	120	200	1250	8.0
				60	0.550		165	1550
4IK25GN-E	4IK25GN-ET	25	1ph 110	60	0.450	120	165	1550	7.0
			1ph 120		0.500
4IK25GN-C	4IK25GN-CT	25	1ph 220	50	0.250	120	200	1250	1.8
			1ph 230		0.230
4IK25GN-H	4IK25GN-HT	25	1ph 220	60	0.230	120	165	1550	1.8
			1ph 230
4IK25GN-S	4IK25GN-ST	25	3ph 220	50	0.185	350	200	1250	-
				60	0.170	250	165	1550
4IK25GN-S3	4IK25GN-S3T	25	3ph 380	50	0.107	350	200	1250	-
				60	0.098	250	165	1550

● When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.

● Note: "-A" it means the voltage 110V, the assembly capacitor vaule it is according the labe.

● Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

● Enter the gear ratio in the box (□) within the model name. The colored background(□)indicates the same rotating direction of the motor while the rotating direction of others are opposite.

● The speed is calculated by diving the motor’s synchronous speed (50Hz:1500r/min、60Hz:1800r/min) by the gear ratio. The actual speed is 2%~20% less than the displayed value,
depending on the size of the load.

● To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio:10) between the gearhead and motor. In that case, the permissible torque is 8N·m.

Type Motor/Gearhead		Gear Ratio		7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
4IK25GN-A□ 4IK25GN-E□ 4IK25GN-C□ 4IK25GN-H□ 4IK25GN-S□ 4IK25GN-S3□	4GN□RC 4GN□RT	Allowance Torque	50Hz	0.99	1.18	1.64	1.97	2.37	3.29	3.95	4.73	6.58	7.10	8.00	8.00	8.00	8.00	8.00	8.00
			50Hz	10.1	12.1	16.8	20.1	24.2	33.5	40.3	48.3	67.1	72.5	80.0	80.0	80.0	80.0	80.0	80.0
			60Hz	0.80	0.95	1.33	1.59	1.91	2.65	3.18	3.82	5.30	5.73	7.16	8.00	8.00	8.00	8.00	8.00
			60Hz	8.12	9.74	13.5	16.2	19.5	27.1	32.5	39.0	54.1	58.4	73.0	80.0	80.0	80.0	80.0	80.0

4IK25GN-A□/4GN□RC 4IK25GN-C□/4GN□RC 4IK25GN-S□/4GN□RC
4IK25GN-E□/4GN□RC 4IK25GN-H□/4GN □RC 4IK25GN-S3□/4GN□RC

4IK25GN-A□/4GN□RT 4IK25GN-C□/4GN□RT 4IK25GN-S□/4GN□RT
4IK25GN-E□/4GN□RT 4IK25GN-H□/4GN□RT 4IK25GN-S3□/4GN□RT

AC Gear Motor

6W~150W 2-Poles High Speed Induction AC Motor

PDF Drawing + Contact us

Model Type Round Shaft Type	Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
2IK6A-B	6	1ph 110	50	0.18	35	22	2650	3
			60	0.20		18	3100
2IK6A-D	6	1ph 220	50	0.11	35	22	2650	0.8
			60	0.12		18	3100
3IK15A-B	15	1ph 110	50	0.38	65	54	2650	6
			60	0.40		46	3100
3IK15A-D	15	1ph 220	50	0.18	65	54	2650	1.5
			60	0.22		46	3100
4IK25A-B	25	1ph 110	50	0.55	90	90	2650	10
			60	0.65		77	3100
4IK25A-D	25	1ph 220	50	0.25	90	90	2650	2
			60	0.30		77	3100
4IK25A-T	25	1ph 220	50	0.20	220	88	2700	-
			60	0.15	185	75	3200
4IK40A-BF	40	1ph110	50	0.80	120	147	2600	12
			60	0.85		123	3100
4IK40A-DF	40	1ph 220	50	0.40	120	147	2600	3
			60	0.45		123	3100
4IK40A-TF	40	1ph 220	50	0.27	350	147	2600	-
			60	0.22	300	123	3100
5IK40A-B	40	1ph 110	50	0.75	140	147	2600	10
			60	0.90		123	3100
5IK40A-D	40	1ph 220	50	0.38	140	144	2650	3
			60	0.40		120	3200
5IK40A-T	40	1ph 220	50	0.26	350	147	2600	-
			60	0.21	300	123	3100
5IK60A-BF	60	1ph110	50	1.05	170	215	2650	15
			60	1.0		180	3200
5IK60A-DF	60	1ph 220	50	0.52	180	215	2650	4
			60	0.55		180	3200
5IK60A-TF	60	1ph 220	50	0.35	500	215	2650	-
			60	0.30	420	180	3200
5IK90A-BF	90	1ph 110	50	1.50	250	325	2650	25
			60	1.80		270	3200
5IK90A-DF	90	1ph 220	50	0.72	250	325	2650	6
			60	0.90		270	3200
5IK90A-TF	90	3ph 220	50	0.50	800	325	2650
5IK90A-TFT			60	0.42	670	270	3200
5IK120A-BF	120	1ph110	50	1.85	330	450	2650	30
			60	2.25		360	3200
5IK120A-DF	120	1ph 220	50	0.95	330	450	2650	8
			60	1.10		360	3200
5IK120A-TE	120	3ph 220	50	0.65	1000	430	2650
5IK120A-TFT			60	0.50	900	370	3100
5IK150A-BF	150	1ph 110	50	2.50	400	540	2650	35
			60	2.85		450	3200
5IK150A-DF	150	1ph 220	50	1.20	400	540	2650	10
			60	1.52		450	3200
5IK150A-TF	150	3ph 220	50	0.85	1250	550	2600	-
5IK150A-TFT			60	0.70	1100	460	3100
5IK150A-T3F	150	3ph 380	50	0.49	1250	550	2600	-
5IK150A-T3FT			60	0.40	1100	460	3100

●Motor

Output power	Voltage	Model
6W	1ph110VAC	2IK6A-B
6W	1ph220VAC	2IK6A-D
15W	1ph110VAC	3IK15A-B
15W	1ph220VAC	3IK15A-D
25W	1ph110VAC	4IK25A-B
	1ph220VAC	4IK25A-D
	3ph220VAC	4IK25A-T
	3ph380VAC	4IK25A-T3
40W	1ph110VAC	4IK40A-BF
	1ph220VAC	4IK40A-DF
	3ph220VAC	4IK40A-TF
	3ph380VAC	4IK40A-T3F
40W	1ph110VAC	5IK40A-B
	1ph220VAC	5IK40A-D
	3ph220VAC	5IK40A-T
	3ph380VAC	5IK40A-T3
60W	1ph110VAC	5IK60A-BF
	1ph220VAC	5IK60A-DF
	3ph220VAC	5IK60A-TF
	3ph220VAC	5IK60A-TFT
	3ph380VAC	5IK60A-T3F
	3ph380VAC	5IK60A-T3FT
90W	1ph110VAC	5IK90A-BF
	1ph220VAC	5IK90A-DF
	3ph220VAC	5IK90A-TF
	3ph220VAC	5IK90A-TFT
	3ph380VAC	5IK90A-T3F
	3ph380VAC	5IK90A-T3FT
120W	1ph110VAC	5IK120A-BF
	1ph220VAC	5IK120A-DF
	3ph220VAC	5IK120A-TF
	3ph220VAC	5IK120A-TFT
	3ph380VAC	5IK120A-T3F
	3ph380VAC	5IK120A-T3FT
150W	1ph110VAC	5IK150A-BF
	1ph220VAC	5IK150A-DF
	3ph220VAC	5IK150A-TF
	3ph220VAC	5IK150A-TFT
	3ph380VAC	5IK150A-T3F
	3ph380VAC	5IK150A-T3FT

●6W

Motor
2IK6A-B﹑21K6A-D
Weight：0.65kg

●15W

Motor
3IK15A-B，3IK15A-D
Weight：0.90kg

●25W

Motor
41K25A-B，41K25A-D，4IK25A-T
Weight：1.4kg

●40W

Motor
41K40A-BF，4IK40A-DF，4IK40A-TF
Weight：1.6kg

●40W

Motor
51K40A-B，5IK40A-D，5IK40A-T
Weight：2.0kg

●60W

Motor
5IK60A-BF，5IK60A-DF，5IK60A-TF
Weight：2.4kg

●90W

Motor
5IK90A-BF，5IK90A-DF，5IK90A-TF
Weight：2.8kg

●120W

Motor
5IK120A-BF、5IK120A-DF、5IK120A-TP5IK150A-BF、5IK150A-DF、5IK150A-TF
Weight：0.90kg

●90W、120W、150W

Motor
5ІK90A-TFT，5IK120A-TFT，5IK150A-TFT
Weight：3.3kg

Model	Capacitor Model	L	W	H
Pinion Shaft	Capacitor Model	L	W	H
2IK6A-B	ZD30CFAUL	38	18.5	29
2IK6A-D	ZD08BFAUL	36	10.5	20
3IK15A-B	ZD60CFAUL	48	23	32
3IK15A-D	ZD15BFAUL	36	12.5	24
4IK25A-B	ZD100CFAUL	38	19.5	31
4IK25A-D	ZD20BFAUL	36	15	25
4IK40A-BF	ZD120CFAUL	58	30	40
5IK40A-DF	ZD30BFAUL	38	18.5	29
5IK40A-B	ZD100CFAUL	58	26	38
5IK40A-D	ZD30BFAUL	38	18.5	29
5IK60A-BF	ZD150CFAUL	47	20	31
5IK60A-DF	ZD40BFAUL	47	17	31
5IK90A-BF	ZD250CFAUL	47	27	37
5IK90A-DF	ZD60BFAUL	48	23	32
5IK120A-BF	ZD300CFAUL	58	26	38
5IK120A-DF	ZD80BFAUL	40	26.5	38
5IK150A-BF	ZD350CFAUL	58	30	40
5IK150A-DF	ZD100BFAUL	58	26	38

●The direction of motor rotation is as viewed from the shaft end of motor. CW represents the clockwise direction, while CCW represents the counterclockwise direction.

AC Gear Motor

200W Induction AC Motor/Gear Motor

PDF Drawing + Contact us

■ Gear Motor-Torque Table

●Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

●Enter the gear ratio in the box (□) within the model name.

●The speed is calculated by diving the motor's synchronous speed (50Hz：1500r/min、60Hz：1800r/min) by the gear ratio. The actual speed is 2%-20% less than the displayed value,depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table. In that case, the permissible torque is 60N-m.

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

Type Motor/Gearhead		Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
6IK200GU-AF□ 6IK200GU-EF□ 6IK200GU-CF□ 6IK200GU-HF□ 6IK200GU-SF□ 6IK200GU-S3F□	6GU□RC 6GU□RT	Allowable Torque	50Hz	3.71	4.46	6.19	7.43	9.28	11.1	13.9	16.7	20.1	25.2	30.3	36.3	50.4	60.0	60.0	60.0	60.0	60.0	60.0	60.0
			50Hz	37.9	45.5	63.1	75.8	94.7	114	142	171	205	257	30.9	370	515	600	600	600	600	600	600	600
			60Hz	2.99	3.59	4.99	5.99	7.49	8.98	11.2	13.5	16.2	20.3	24.4	29.3	40.7	48.8	60.0	60.0	60.0	60.0	60.0	60.0
			60Hz	30.6	36.7	50.9	61.1	76.4	91.7	115	138	165	207	249	299	415	498	600	600	600	600	600	600

■Induction,Reversible Type Drawing

■Wiring Diagram

●The direction of motor rotation is as viewed from the shaft end of motor. CW represents the clockwise direction，while CCW represents the counterclockwise direction.
●Name indicated in the list is pinion shaft type，also valid for the equivalent round shaft type.

Note:

Change the direction of single-phase motor rotation only after bring the motor to a stop.
If an attempt is made to change the direction of rotation while the motor is rotating，motor may ignore reversing command or change its direction of rotation after some delay.

Model •Type Upper:Pinion Shaft Below:Round Shaft		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Lead Wire Type Dimensions ①	Terminal Box Type Dimensions ②
6IK200GU-AF (6IK200A-AF)	6IK200GU-AFT (6IK200A-AFT)	200	1ph 100	50	3.2	900	1520	1250	45.0
				60	3.5		1230	1550
6IK200GU-EF (6IK200A-EF )	6IK200GU-EFT (6IK200A-EFT)	200	1ph 110	60	2.75	850	1230	1550	35.0
			1ph 120		2.65
6IK200GU-CF (6IK200A-CF)	6IKZ00GU-CFT (6IK200A-CFT)	200	1ph 220	50	1.40	1000	1520	1250	10.0
			1ph 230
6IK200GU-HF (6IK200A-HF)	6IK200GU-HFT (6IK200A-HFT)	200	1ph 220	60	1.40	900	1230	1550
			1ph 230
6IK200GU-SF (6IK200A-SF)	6IK200GU-SFT (6IK200A-SFT)	200	3ph 220	50	1.20	3400	1520	1250	-
				60	1.0	2700	1230	1550
6IK200GU-S3F (6IK200A-S3F)	6IK200GU-S3FT (6IK200A-S3FT)	200	3ph 380	50	0.69	3400	1520	1250	-
				60	0.58	2700	1230	1550

●When the motor is approved under various safety standards，the model name on the nameplate is the approved model name.

●Note:"-A"it means the voltage 110v，the assembly capacitor vaule it is according the label.

●Motor

Type	Model
Type	Pinion Shaft	Round Shaft
Lead Wire Type	6IK200GU-AF	6IK200A-AF
	6IK200GU-EF	6IK200A-EF
	6IK200GU-CF	6IK200A-CF
	6IK200GU-HF	6IKZ00A-HF
	6IK200GU-SF	6IK200A-SF
	6IK200GU-S3F	6IK200A-S3F
Terminal Box Type	6IK200GU-AFT	6IK200A-AFT
	6IK200GU-EFT	6IK200A-EFT
	6IK200GU-CFT	6IK200A-CFT
	6IK200GU-HFT	6IK200A-HFT
	6IK200GU-SFT	6IK200A-SFT
	6IK200GU-S3FT	6IK200A-S3FT

●Parallel Shaft Gearhead(Sold Separately)

Geartiead Type	Geartiead Model	Gear Ratio
Long Life • Low Noise	6GU□K	3、3.6、5、6、7.5、9、 12.5、15、18、25、30、 36、 50、 60、 75、 90、 100、 120、 150、 180、 200

●Enter the gear ratio in the box (□) within the model name

●Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

●Enter the gear ratio in the box(□)within the model name.

●The speed is calculated by dividing the motor's synchronous speed (50Hz ： 1500r/min、60Hz ： 1800r/min) by the gear ratio. The actual speed is 2%~20% less than the displayed value，depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table， attach a decimal gearhead(gear ratio：10)between the gearhead and motor. In that case， the permissible torque is 20 N.m.

Type Motor/Gearhead	Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
	Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	42	30	25	20	16	15	12.5	10	8.3	7.5
	Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
6IK200GU-AF□ 6IK200GU-EF□ 6IK200GU-CF□ 6IK200GU-HF□ 6IK200GU-SF□	6GU□K	50Hz	3.71	4.46	6.19	7.43	9.28	11.1	13.9	16.7	20.1	25.2	30.3	36.3	40	40	40	40	40	40	40	40	40
		50Hz	37.9	45.5	63.1	75.8	94.7	114	142	171	205	257	309	370	400	400	400	400	400	400	400	400	400
		60Hz	2.99	3.59	4.99	5.99	7.49	8.98	11.2	13.5	16.2	20.3	24.4	29.3	40	40	40	40	40	40	40	40	40
		60Hz	30.6	36.7	50.9	61.1	76.4	91.7	115	138	165	207	249	299	400	400	400	400	400	400	400	400	400

Mounting screws are included with gearhead.

●Lead Wiring Type①

Weight：Motor：5.0kg Gearhead：2.1kg

Motor Model	Gearhead Model	Gear Ratio	L1
6IK200GU-AF	6GU□K	3~200	72
6IK200GU-EF
6IK200GU-CF
6IK200GU-HF
6IK200GU-SF
6IK200GU-S3F

●Enter the gear ratio in the box(□)within the model name

●Terminal Box Type②

Weight：Motor：5.15kg Gearhead：2.1kg

●Use cable with a diameter ofΦ6~Φ12mm

Motor Model	Gearhead Model	Gear Ratio	L1
6IK200GU-AFT	6GU□K	3~200	72
6IK200GU-EFT
6IK200GU-CFT
6IK200GU-HFT
6IK200GU-SFT
6IK200GU-S3FT

●Enter the gear ratio in the box (□) within the model name

●Shaft Section Of Round Shaft Type

Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.

●Key•Keyway(Accessory Of Gearhead)

Model		Capacitor Model	L	W	H
Pinion Shaft	Round Shaft	Capacitor Model	L	W	H
6IK200GU-AF	6IK200A-AF	ZD450CFAUL	70	38	52
6IK200GU-EF	6IK200A-EF	ZD350CFAUL	58	30	40
6IK200GU-CF	6IK200A-CF	ZD100BFAUL	58	26	38

●Note: Conventional capacitor is a lead wire type. Inserted 187# is optional

●Enter the code that represents the terminal box type (T) in the box (□) within the model name

AC Gear Motor

140W Induction AC Motor/Gear Motor

PDF Drawing + Contact us

■ Gear Motor-Torque Table

●Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

●Enter the gear ratio in the box (□) within the model name.

●The speed is calculated by diving the motor's synchronous speed (50Hz：1500r/min、60Hz：1800r/min) by the gear ratio. The actual speed is 2%-20% less than the displayed value,depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table. In that case, the permissible torque is 60N.m.

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	3.6	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	417	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	500	36	30	24	20	18	15	12	10
6IK140GU-AF□ 6IK140GU-EF□ 6IK140GU-CF□ 6IK140GU-HF□ 6IK140GU-SF□ 6IK140GU-S3F□	6GU□RC 6GU□RT	Allowable Torque	50Hz	1.99	2.39	3.31	3.98	4.97	6.63	9.21	11.0	13.3	18.4	22.1	26.5	33.1	39.8	49.7	59.6	60.0	60.0	60.0	60.0
			50Hz	20.3	24.3	33.8	40.6	50.7	67.6	93.9	113	135	188	225	271	338	406	507	600	600	600	600	600
			60Hz	1.60	1.92	2.67	3.21	4.01	5.34	7.42	8.91	10.7	14.8	17.8	21.4	26.7	32.1	40.1	48.1	53.4	60.0	60.0	60.0
			60Hz	16.4	19.6	27.3	32.7	40.9	54.5	75.8	90.9	109	152	182	218	273	327	409	491	545	600	600	600

■Induction Type Drawing

■Wiring Diagram

●The direction of motor rotation is as viewed from the shaft end of motor. CW represents the clockwise direction，while CCW represents the counterclockwise direction.
●Name indicated in the list is pinion shaft type，also valid for the equivalent round shaft type.

Note:

Change the direction of single-phase motor rotation only after bring the motor to a stop.
If an attempt is made to change the direction of rotation while the motor is rotating，motor may ignore reversing command or change its direction of rotation after some delay.

Model •Type Upper:Pinion Shaft Below:Round Shaft		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Lead Wire Type Dimensions ①	Terminal Box Type Dimensions ②
6IK140GU-AF (6IK140A-AF)	6IKH0GU-AFT (6IK140A-AFT)	140	1ph 100	50	2.7	700	1080	1250	35.0
				60	3.0		870	1550
6IK140GU-EF (6IKH0A-EF)	6IK140GU-EFT (6IK140A-EFT)	140	1ph 110	60	1.80	700	850	1600	25.0
			1ph 120		1.95
6IK140GU-CF (6IK140A-CF)	6IK140GU-CFT (6IK140A-CFT)	140	1ph 220	50	1.05	850	1040	1350	10.0
			1ph 230		1.15
6IK140GU-HF (6IK140A-HF )	6IK140GU-HFT (6IK140A-HFT)	140	1ph 220	60	1.05	750	850	1600
			1ph 230		1.15
6IK140GU-SF (6IKH0A-SF)	6IK140GU-SFT (6IK140A-SFT)	140	3ph 220	50	0.85	2700	1080	1250	-
				60	0.75	2200	870	1550
6IK140GU-S3F (6IK140A-S3F)	6IK140GU-S3FT (6IK140A-S3FT)	140	3ph 380	50	0.49	2700	1080	1250	-
				60	0.43	2200	870	1550

●When the motor is approved under various safety standards，the model name on the nameplate is the approved model name.

●Note:"-A"it means the voltage 110v，the assembly capacitor vaule it is according the label.

●Motor

Type	Model
Type	Pinion Shaft	Round Shaft
Lead Wire Type	6IK140GU-AF	6IK140A-AF
	6IK140GU-EF	6IK140A-EF
	6IK140GU-CF	6IK140A-CF
	6IK140GU-HF	6IK140A-HF
	6IK140GU-SF	6IK140A-SF
	6IK140GU-S3F	6IK140A-S3F
Terminal Box Type	6IK140GU-AFT	6IK140A-AFT
	6IK140GU-EFT	6IK140A-EFT
	6IK140GU-CFT	6IK140A-CFT
	6IK140GU-HFT	6IK140A-HFT
	6IK140GU-SFT	6IK140A-SFT
	6IK140GU-S3FT	6IK140A-S3FT

●Parallel Shaft Gearhead(Sold Separately)

Geartiead Type	Geartiead Model	Gear Ratio
Long Life • Low Noise	6GU□K	3、3.6、5、6、7.5、9、 12.5、15、18、25、30、 36、 50、 60、 75、 90、 100、 120、 150、 180、 200

●Enter the gear ratio in the box (□) within the model name

●Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

●Enter the gear ratio in the box (□) within the model name.

●The speed is calculated by dividing the motor's synchronous speed (50Hz ： 1500r/min、60Hz ： 1800r/min) by the gear ratio. The actual speed is 2%~20% less than the displayed value，depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table， attach a decimal gearhead (gear ratio：10) between the gearhead and motor. In that case， the permissible torque is 20 N.m.

Type Motor/Gearhead	Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
Type Motor/Gearhead	Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
6IK140GU-AF□ 6IK140GU-EF□ 6IK140GU-SF□	6GU□K	50Hz	2.6	3.1	4.4	5.2	6.6	7.9	9.9	11.8	14.2	17.8	21.4	25.7	35.6	40	40	40	40	40	40	40	40
			26.5	31.6	44.8	53.0	67.3	80.6	101	120	144	181	218	262	363	400	400	400	400	400	400	400	400
			2.5	3.0	4.2	5.1	6.3	7.6	9.5	11.4	13.7	17.2	20.6	247	34.3	40	40	40	40	40	40	40	40
			25.5	30.6	42.8	52.0	63.2	77.5	96.9	116	139	175	210	252	349	400	400	400	400	400	400	400	400

Type Motor/Gearhead	Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
Type Motor/Gearhead	Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
6IK140GU-AF□ 6IK140GU-SF□ 6IK140GU-EF□ 6IKI40GU-HF□	6GU□K	60Hz	2.1	2.5	3.5	4.2	5.3	6.3	7.9	9.5	11.4	14.4	17.2	20.7	28.7	34.5	40	40	40	40	40	40	40
			21.4	25.5	35.7	42.8	54.0	64.2	80.6	96.9	116	147	175	211	292	352	400	400	400	400	400	400	400
			2.1	2.5	3.4	4.1	5.2	6.2	7.8	9.3	11.2	12.0	16.8	20.2	28.0	33.7	40	40	40	40	40	40	40
			21.4	25.5	34.6	41.8	53.0	63.2	79.5	94.8	114	122	171	206	285	343	400	400	400	400	400	400	400

Mounting screws are included with gearhead.

●Lead Wiring Type①

Weight：Motor：5.0kg Gearhead：2.1kg

Motor Model	Gearhead Model	Gear Ratio	L1
6IK140GU-AF	6GU□K	3~200	72
6IK140GU-EF
6IK140GU-CF
6IK140GU-HF
6IK140GU-SF
6IK140GU-S3F

●Enter the gear ratio in the box (□) within the model name

●Terminal Box Type②

Weight：Motor：5.15kg Gearhead：2.1kg

●Use cable with a diameter of Φ6~Φ12mm

Motor Model	Gearhead Model	Gear Ratio	L1
6IK140GU-AFT	6GU□K	3~200	72
6IK140GU-EFT
6IK140GU-CFT
6IK140GU-HFT
6IK140GU-SFT
6IK140GU-S3FT

●Enter the gear ratio in the box(□)within the model name

●Shaft Section Of Round Shaft Type

Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.

●Key•Keyway(Accessory Of Gearhead)

Model		Capacitor Model	L	W	H
Pinion Shaft	Round Shaft	Capacitor Model	L	W	H
6IK140GU-AF	6IK140A-AF	ZD350CFAUL	58	30	40
6IK140GU-EF	6IK140A-EF	ZD250CFAUL	47	27	37
6IK140GU-CF	6IK140A-CF	ZD100BFAUL	58	26	38

●Note: Conventional capacitor is a lead wire type. Inserted 187# is optional

●Enter the code that represents the terminal box type (T) in the box (□) within the model name

AC Gear Motor

120W Induction AC Motor/Gear Motor

PDF Drawing + Contact us

■Gear Motor-Torque Table

●Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

●Enter the gear ratio in the box (□) within the model name.

●The speed is calculated by diving the motor's synchronous speed (50Hz：1500r/min、60Hz：1800r/min) by the gear ratio. The actual speed is 2%-20% less than the displayed value,depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table,attach a mid-gearbox (gear ratio：10) between the gearhead and motor. In that case, the permissible torque is 20N.m.

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
5IK120GU-AF□	5GU□RC 5GU□RT	Allowable Torque	50Hz	1.70	2.05	2.84	3.41	4.73	5.68	7.89	9.47	11.4	15.8	18.9	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
5IK120GU-EF□
5IK120GU-CF□
5IK120GU-HF□				17.4	20.9	29.0	34.8	48.3	58.0	80.5	96.6	116	161	193	200	200	200	200	200	200	200	200	200
5IK120GU-SF□			60Hz	1.37	1.65	2.29	2.75	3.82	4.58	6.36	7.64	9.16	12.7	15.3	16.5	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
5IK120GU-S3F□			60Hz	14.0	16.8	23.4	28.0	39.0	46.7	64.9	77.9	93.5	130	156	168	200	200	200	200	200	200	200	200

■Induction Type Drawing

■Gear Motor-Torque Table

●Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

●Enter the gear ratio in the box (□) within the model name.

●The speed is calculated by diving the motor's synchronous speed (50Hz：1500r/min、60Hz：1800r/min) by the gear ratio. The actual speed is 2%-20% less than the displayed value,depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table,attach a mid-gearbox (gear ratio：10) between the gearhead and motor. In that case, the permissible torque is 20N.m.

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
5IK120GU-AF□	5GU□RH 5GU□RA	Allowable Torque	50Hz	1.24	1.49	1.86	2.23	2.78	3.34	4.64	5.57	6.68	9.28	11.1	13.4	18.6	20.0	20.0	20.0	20.0	20.0	20.0	20.0
5IK120GU-EF□
5IK120GU-CF□
5IK120GU-HF□				12.6	15.2	18.9	22.7	28.4	34.1	47.4	56.8	68.2	94.7	114	136	189	200	200	200	200	200	200	200
5IK120GU-SF□			60Hz	1.00	1.20	1.50	1.80	2.25	2.69	3.74	4.49	5.39	7.49	8.98	10.8	15.0	18.0	20.0	20.0	20.0	20.0	20.0	20.0
5IK120GU-S3F□			60Hz	10.18	12.2	15.3	18.3	22.9	27.5	38.2	45.8	55.0	76.4	91.7	110	153	183	200	200	200	200	200	200

■Induction Type Drawing

■Wiring Diagram

●The direction of motor rotation is as viewed from the shaft end of motor.CW represents the clockwise direction，while CCW represents the counterclockwise direction.

●Name indicated in the list is pinion shaft type，also valid for the equivalent round shaft type.

Note:

Change the direction of single-phase motor rotation only after bring the motor to a stop.
If an attempt is made to change the direction of rotation while the motor is rotating，motor may ignore reversing command or change its direction of rotation after some delay.

Model •Type Upper:Pinion Shaft Below:Round Shaft		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Lead Wire Type Dimensions ①	Terminal Box Type Dimensions ②
5IK120GU-AF (5IK120A-AF)	5IK120GU-AFT (5IK120A-AFT)	120	1ph 100	50	2.1	600	930	1250	30.0
				60	2.5		750	1550
5IK120GU-EF (5IK120A-EF )	5IK120GU-EFT (5IK120A-EFT)	120	1ph 110	60	1.65	600	750	1550	25.0
			1ph 120		1.80
5IK120GU-CF (5IK120A-CF)	5IK120GU-CFT (5IK120A-CFT)	120	1ph 220	50	1.0	650	930	1250	7.0
			1ph 230		0.95
5IK120GU-HF (5IK120A-HF)	5IK120GU-HFT (5IK120A-HFT)	120	1ph 220	60	1.0	600	750	1550
			1ph 230		0.95
5IK120GU-SF (5IK120A-SF)	5IK120GU-SFT (5IK120A-SFT)	120	3ph 220	50	0.70	1850	930	1250	-
				60	0.60	1600	750	1550
5IK120GU-S3F (5IK120A-S3F)	5IK120GU-S3FT (5IK120A-S3FT)	120	3ph 380	50	0.40	1850	930	1250	-
				60	0.35	1600	750	1550

●When the motor is approved under various safety standards，the model name on the nameplate is the approved model name.

●Note:"-A"it means the voltage 110v，the assembly capacitor vaule it is according the label.

●Motor

Type	Model
Type	Pinion Shaft	Round Shaft
Lead Wire Type	5IK120GU-AF	5IK120A-AF
	5IK120GU-EF	5IK120A-EF
	5IK120GU-CF	5IK120A-CF
	5IK120GU-HF	5IK1Z0A-HF
	5IK120GU-SF	5IK120A-SF
	5IK120GU-S3F	5IK120A-S3F
Terminal Box Type	5IK120GU-AFT	5IK120A-AFT
	5IK120GU-EFT	5IK120A-EFT
	5IK120GU-CFT	5IK120A-CFT
	5IK120GU-HFT	5IK120A-HFT
	5IK120GU-SFT	5IK120A-SFT
	5IK120GU-S3FT	5IK120A-S3FT

●Parallel Shaft Gearhead(Sold Separately)

Gearhead Type	Gearhead Model	Gear Ratio
Long Life • Low Noise	5GU□KB	3、3.6、5、6、7.5、9、 12.5、 15、18、25、30、 36、 50、 60、 75、 90、 100、 120、 150、180、 200
Long Life • Low Noise	5GU10XK (Decimal Gearhead)

●Enter the gear ratio in the box (□) within the model name

●Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

●Enter the gear ratio in the box (□) within the model name.

●The speed is calculated by dividing the motor's synchronous speed (50Hz ： 1500r/min、60Hz ： 1800r/min) by the gear ratio. The actual speed is 2%~20% less than the displayed value，depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table， attach a decimal gearhead (gear ratio：10) between the gearhead and motor. In that case， the permissible torque is 20 N.m.

Type Motor/Gearhead	Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	40	50	60	75	90	100	120	150	180	200
	Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	37	30	25	20	16	15	12.5	10	8.3	7.5
	Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	45	36	30	24	20	18	15	12	10	9
5IK120GU-AF□ 5IK120GU-EF□ 5IK120GU-CF□ 5IK120GU-HF□ 5IK120GU-SF□	5GU□KB 5GU□K	50Hz	2.3	2.7	3.8	4.5	5.6	6.8	8.5	10.2	12.2	15.3	18.4	20	20	20	20	20	20	20	20	20	20	20
		50Hz	23.4	27.5	38.7	45.9	57.1	69.3	86.7	104	124	156	187	200	200	200	200	200	200	200	200	200	200	200
		60Hz	1.8	2.2	3.0	3.6	4.6	5.5	6.8	8.2	9.8	12.4	14.9	17.8	19.5	20	20	20	20	20	20	20	20	20
		60Hz	18.3	22.4	30.6	36.7	46.9	56.1	69.5	83.6	100	126	152	181	199	200	200	200	200	200	200	200	200	200

Mounting screws are included with gearhead.

●Lead Wiring Type①

Weight：Motor：3.4kg Gearhead：1.5kg

Motor Model	Gearhead Model	Gear Ratio	L1
5IK120GU-AF 5IK120GU-EF 5IK120GU-CF 5IK120GU-HF 5IK120GU-SF 5IK120GU-S3F	5GU□KB	3~200	65.5

●Enter the gear ratio in the box(□)within the model name

●Terminal Box Type②

Weight：Motor：3.55kg Gearhead：1.5kg

●Use cable with a diameter of Φ6~Φ12mm

Motor Model	Gearhead Model	Gear Ratio	L1
5IK120GU-AF 5IK120GU-EF 5IK120GU-CF 5IK120GU-HF 5IK120GU-SF 5IK120GU-S3F	5GU□K	3~200	65.5

●Enter the gear ratio in the box (□) within the model name

●Flange Mounting Reducer

Can be mounted on GU type gear shaft
5GU□K
Weight：1.5kg

●Key•Keyway(Accessory Of Gearhead)

●Shaft Section Of Round Shaft Type

Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.

●Decimal Gearhead

Can be connected to GU pinion shaft type
5GU10XK
Weight：0.65kg

Model		Capacitor Model	L	W	H
Pinion Shaft	Round Shaft	Capacitor Model	L	W	H
5IK120GU-AF□	5IK120A-AF□	ZD300CFAUL	58	26	38
5IK120GU-EF□	5IK120A-EF□	ZD250CFAUL	47	27	37
5IK120GU-CF□	5IK120A-CF□	ZD70BFAUL	47	24	37

●Note: Conventional capacitor is a lead wire type. Inserted 187# is optional

●Enter the code that represents the terminal box type (T) in the box (□) within the model name

AC Gear Motor

90W Induction AC Motor/Gear Motor

PDF Drawing + Contact us

■Gear Motor-Torque Table

●Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

●Enter the gear ratio in the box (□) within the model name.

●The speed is calculated by diving the motor's synchronous speed (50Hz：1500r/min、60Hz：1800r/min) by the gear ratio. The actual speed is 2%-20% less than the displayed value,depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table， attach a mid-gearbox(gear ratio：10)between the gearhead and motor. In that case，the permissible torque is 20N.m.

■Allowable Torque Unit：Upside（N.m)/Belowside（kgf.cm）

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
5IK90GU-AF□ 5IK90GU-EF□ 5IK90GU-CF□ 5IK90GU-HF□ 5IK90GU-SF□ 5IK90GU-S3F□	5GU□RC 5GU□RT	Allowable Torque	50Hz	1.28	1.53	2.13	2.56	3.55	4.26	5.92	7.10	8.52	11.8	14.2	15.3	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
			50Hz	13.0	15.7	21.7	26.1	36.2	43.5	60.4	72.5	87.0	121	145	157	200	200	200	200	200	200	200	200
			60Hz	1.03	1.24	1.72	2.06	2.86	3.44	4.77	5.73	6.87	9.54	11.5	12.4	17.2	20.0	20.0	20.0	20.0	20.0	20.0	20.0
			60Hz	10.5	12.6	17.5	21.0	29.2	35.1	48.7	58.4	70.1	97.4	117	126	175	200	200	200	200	200	200	200

■Induction Type Drawing

■Gear Motor-Torque Table

●Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

●Enter the gear ratio in the box (□) within the model name.

●The speed is calculated by diving the motor's synchronous speed (50Hz：1500r/min、60Hz：1800r/min) by the gear ratio. The actual speed is 2%-20% less than the displayed value,depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table， attach a mid-gearbox (gear ratio：10) between the gearhead and motor. In that case， the permissible torque is 20N.m.

■Allowable Torque Unit：Upside（N.m)/Belowside（kgf.cm）

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
5IK90GU-AF□ 5IK90GU-EF□ 5IK90GU-CF□ 5IK90GU-HF□ 5IK90GU-SF□ 5IK90GU-S3F□	5GU□RH 5GU□RA	Allowable Torque	50Hz	0.93	1.11	1.39	1.67	2.09	2.51	3.48	4.18	5.01	6.96	8.35	10.0	13.9	16.7	20.0	20.0	20.0	20.0	20.0	20.0
			50Hz	9.47	11.4	14.2	17.0	21.3	25.6	35.5	42.6	51.1	71.0	85.2	102	142	170	204	200	200	200	200	200
			60Hz	0.75	0.90	1.12	1.35	1.68	2.02	2.81	3.37	4.04	5.61	6.74	8.08	11.2	13.5	16.8	20.0	20.0	20.0	20.0	20.0
			60Hz	7.64	9.17	11.5	13.7	17.2	20.6	28.6	34.4	41.2	57.3	68.7	82.5	115	137	172	200	200	200	200	200

■Induction Type Drawing

■Wiring Diagram

●The direction of motor rotation is as viewed from the shaft end of motor.CW represents the clockwise direction，while CCW represents the counterclockwise direction.

●Name indicated in the list is pinion shaft type，also valid for the equivalent round shaft type.

Note:

Change the direction of single-phase motor rotation only after bring the motor to a stop.
If an attempt is made to change the direction of rotation while the motor is rotating，motor may ignore reversing command or change its direction of rotation after some delay.

Model •Type Upper:Pinion Shaft Below:Round Shaft		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Lead Wire Type Dimensions ①	Terminal Box Type Dimensions ②
5IK90GU-AF (5IK90A-AF)	5IK90GU-AFT (5IK90A-AFT)	90	1ph 100	50	1.55	450	700	1250	25.0
				60	1.85		570	1550
5IK90GU-EF (5IK90A-EF )	5IK90GU-EFT (5IK90A-EFT)	90	1ph 110	60	1.40	500	570	1550	20.0
			1ph 120		1.45
5IK90GU-CF (5IK90A-CF)	5IK90GU-CFT (5IK90A-CFT)	90	1ph 220	50	0.72	450	700	1250	5.0
			1ph 230		0.70
5IK90GU-HF (5IK90A-HF )	5IK90GU-HFT (5IK90A-HFT)	90	1ph 220	60	0.71	450	570	1550
			1ph 230		0.75
5IK90GU-SF (5IK90A-SF)	5IK90GU-SFT (5IK90A-SFT)	90	3ph 220	50	0.60	1350	700	1250	-
				60	0.55	1100	570	1550
5IK90GU-S3F (5IK90A-S3F)	5IK90GU-S3FT (5IK90A-S3FT)	90	3ph 380	50	0.35	1350	700	1250	-
				60	0.32	1100	570	1550

●When the motor is approved under various safety standards，the model name on the nameplate is the approved model name.

●Note:"-A"it means the voltage 110V，the assembly capacitor vaule it is according the label.

●Motor

Type	Model
Type	Pinion Shaft	Round Shaft
Lead Wire Type	5IK90GU-AF	5IK90A-AF
	5IK90GU-EF	5IK90A-EF
	5IK90GU-CF	5IK90A-CF
	5IK90GU-HF	5IK90A-HF
	5IK90GU-SF	5IK90A-SF
	5IK90GU-S3F	5IK90A-S3F
Terminal Box Type	5IK90GU-AFT	5IK90A-AFT
	5IK90GU-EFT	5IK90A-EFT
	5IK90GU-CFT	5IK90A-CFT
	5IK90GU-HFT	5IK90A-HFT
	5IK90GU-SFT	5IK90A-SFT
	5IK90GU-S3FT	5IK90A-S3FT

●Parallel Shaft Gearhead（Sold Separately）

Gearhead Type	Gearhead Model	Gear Ratio
Long Life • Low Noise	5GU□KB	3、3.6、5、6、7.5、9、 12.5、15、18、25、30、 36、 50、 60、 75、 90、 100、 120、 150、 180、 200
Long Life • Low Noise	5GU10XK (Decimal Gearhead )

●Enter the gear ratio in the box (□) within the model name

●Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

●Enter the gear ratio in the box（□）within the model name.

●The speed is calculated by dividing the motor's synchronous speed （50Hz ： 1500r/min、60Hz ： 1800r/min） by the gear ratio. The actual speed is 2%~20% less than the displayed value，depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table， attach a decimal gearhead（gear ratio：10）between the gearhead and motor. In that case， the permissible torque is 20 N.m.

Type Motor/Gearhead	Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
	Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
	Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
5IK90GU-AF□ 5IK90GU-EF□ 5IK90GU-CF□ 5IK90GU-HF□ 5IK90GU-SF□	5GU□KB 5GU□K	50Hz	1.1	2.0	2.8	3.4	4.3	5.1	6.4	7.7	9.2	11.6	13.6	16.6	20	20	20	20	20	20	20	20	20
		50Hz	17.3	20.4	28.6	34.7	43.9	52.0	65.3	78.6	93.3	118	142	169	200	200	200	200	200	200	200	200	200
		60Hz	1.4	1.7	2.3	2.8	3.5	4.2	5.2	6.2	7.5	9.4	11.3	13.5	18.8	20	20	18.8	20	20	20	20	20
		60Hz	14.3	17.3	23.5	28.6	35.7	42.9	53.1	63.3	76.5	95.9	115	138	19.2	200	200	192	200	200	200	200	200

Mounting screws are included with gearhead.

●Lead Wiring Type①

Weight：Motor：3.2kg Gearhead：1.5kg

Motor Model	Gearhead Model	Gear Ratio	L1
5IK90GU-AF 5IK90GU-EF 5IK90GU-CF 5IK90GU-HF 5IK90GU-SF 5IK90GU-S3F	5GU□KB	3~200	65.5

●Enter the gear ratio in the box (□) within the model name

●Terminal Box Type②

Weight：Motor：3.35kg Gearhead：1.5kg

●Use cable with a diameter of Φ6-Φ12mm

Motor Model	Gearhead Model	Gear Ratio	L1
5IK90GU-AFT 5IK90GU-EFT 5IK90GU-CFT 5IK90GU-HFT 5IK90GU-SFT 5IK90GU-S3FT	5GU□KB	3~200	65.5

●Enter the gear ratio in the box (□) within the model name

●Flange Mounting Reducer

Can be mounted on GU type gear shaft
5GU□K
Weight：1.5kg

●Key•Keyway(Accessory Of Gearhead)

●Shaft Section Of Round Shaft Type

Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.

●Decimal Gearhead

Can be connected to GU pinion shaft type
5GN10XK
Weight：0.65kg

Model		Capacitor Model	L	W	H
Pinion Shaft	Round Shaft	Capacitor Model	L	W	H
5IK90GU-AF□	5IK90A-AF□	ZD250CFAUL	47	27	37
5IK90GU-EF□	5IK90A-EF□	ZD200CFAUL	47	23	35
5IK90GU-CF□	5IK90A-CF□	ZD50BFAUL	47	20	31

●Note: Conventional capacitor is a lead wire type. Inserted 187# is optional

●Enter the code that represents the terminal box type (T) in the box (□) within the model name

AC Gear Motor

60W Induction AC Motor/Gear Motor

PDF Drawing + Contact us

■ Gear Motor-Torque Table

●Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

●Enter the gear ratio in the box (□) within the model name.

●The speed is calculated by diving the motor's synchronous speed （50Hz：1500r/min、60Hz：1800r/min) by the gear ratio. The actual speed is 2%-20% less than the displayed value,depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table， attach a mid-gearbox （gear ratio：10） between the gearhead and motor. In that case， the permissible torque is 20N.m.

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
5IK60GU-AF□ 5IK60GU-EF□ 5IK60GU-CF□ 5IK60GU-HF□ 5IK60GU-SF□ 5IK60GN-S3F□	5GU□RC 5GU□RT	Allowable Torque	50Hz	0.85	1.02	1.42	1.70	2.37	2.84	3.95	4.73	5.68	7.89	9.47	10.2	14.2	17.0	20.0	20.0	20.0	20.0	20.0	20.0
			50Hz	8.70	10.4	14.5	17.4	24.2	29.0	40.3	48.3	58.0	80.5	96.6	104	145	174	200	200	200	200	200	200
			60Hz	0.69	0.82	1.15	1.37	1.91	2.29	3.18	3.82	4.58	6.36	7.64	8.25	11.5	13.7	17.2	20.0	20.0	20.0	20.0	20.0
			60Hz	6.73	8.08	11.2	13.5	19.48	23.37	32.46	38.96	46.75	64.93	77.92	84.1	117	140	175	200	200	200	200	200

■Induction Type Drawing

■Gear Motor-Torque Table

●Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type （T） in the box （口） within the model name.

●Enter the gear ratio in the box （口） within the model name.

●The speed is calculated by diving the motor's synchronous speed （50Hz：1500r/min、60Hz：1800r/min） by the gear ratio. The actual speed is 2%~20% less than the displayed value，depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox （gear ratio：10） between the gearhead and motor. In that case， the permissible torque is 20N.m.

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
5IK60GU-AF□ 5IK60GU-EF□ 5IK60GU-CF□ 5IK60GU-HF□ 5IK60GU-SF□ 5IK60GN-S3F□	5GU□RH 5GU□RA	Allowable Torque	50Hz	0.62	0.74	0.93	1.11	1.39	1.67	2.32	2.78	3.34	4.64	5.57	6.68	9.28	11.1	13.9	16.7	18.6	20.0	20.0	20.0
			50Hz	6.31	7.58	9.47	11.4	14.2	17.0	23.7	28.4	34.1	47.4	56.8	68.2	94.7	114	142	170	189	200	200	200
			60Hz	0.50	0.60	0.75	0.90	1.12	1.35	1.87	2.25	2.69	3.74	4.49	5.39	7.49	8.98	11.2	13.5	15.0	18.0	20.0	20.0
			60Hz	5.09	6.11	7.64	9.17	11.5	13.7	19.1	22.9	27.5	38.2	45.8	55.0	76.4	91.7	115	137	153	183	200	200

■Induction Type Drawing

Model Type Upper:Pinion Shaft Below:Round Shaft		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Lead Wire Type Dimensiors ①	Terminal Box Type Dimensions②
5IK60GN-AF (5IK60A-AF)	5IK60G-AFT (5IK60A-AFT)	60	1ph 100	50	1.00	320	470	1250	20.0
				60	1.10		380	1550
5IK60GN-EF (5IK60A-EF )	5IK60GN-EFT ( 5IK60A-EFT )	60	1ph 110	60	0.80	300	380	1550	12.0
			1ph 120		0.85
5IK60GN-CF (5IK60A-CF )	5IK60GN-CFT (5IK60A-CFT)	60	1ph 220	50	0.50	340	470	1250	4.0
			1ph 230		0.55
5IK60GN-HF (5IK60A-HF)	5IK60GN-HFT (5IK60A-HFT)	60	1ph 220	60	0.50	340	380	1550
			1ph 230		0.55
5IK60GN-SF (5IK60A-SF)	5IK60GN-SFT (5IK60A-SFT)	60	3ph 220	50	0.45	1000	470	1250	-
				60	0.40	800	380	1550
5IK60GN-S3F (5IK60A-S3F)	5IK60GN-S3FT (5IK60A-S3FT)	60	3ph 380	50	0.26	1000	470	1250	-
				60	0.23	800	380	1550

●When the motor is approved under various safety standards，the model name on the nameplate is the approved model name.

●Note:"-A"it means the voltage 110v，the assembly capacitor vaule it is according the label.

●Motor

Type	Model
Type	Pinion Shaft	Round Shaft
Lead Wire Type	5IKC60GN-AF	5IK60A-AF
	5IK60GN-EF	5IK60A-EF
	5IK60GN-CF	5IK60A-CF
	5IK60GN-HF	5IK60A-HF
	5IK60GN-SF	5IK60A-SF
	5IK60GN-S3F	5IK60A-S3F
Terminal Box Type	5IK60GN-AFT	5IK60A-AFT
	5IK60GN-EFT	5IK60A-EFT
	5IK60GN-CFT	5IKB0A-CFT
	5IK60GN-HFT	5IK60A-HFT
	5IK60GN-SFT	5IK60A-SFT
	5IK60GN-S3FT	5IK60A-S3FT

●Parallel Shaft Gearhead（Sold Separately）

Gearhead Type	Gearhead Model	Gear Ratio
Long Life • Low Noise	5GN□K	3、3.6、5、6、7.5、9、 12.5、15、18、25、30、 36、50、50、75、90、 100、120、150、180 、200
Long Life • Low Noise	5GN10XK ( Decimal Gearhead)

●Enter the gear ratio in the box (□) within the model name

●Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

●Enter the gear ratio in the box（□）within the model name.

●The speed is calculated by dividing the motor's synchronous speed （50Hz ： 1500r/min、60Hz ： 1800r/min） by the gear ratio. The actual speed is 2%~20% less than the displayed value，depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table， attach a decimal gearhead（gear ratio：10）between the gearhead and motor. In that case， the permissible torque is 10 N.m.

Type Motor/Gearhead	Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
	Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
	Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
5IK60GN-AF□ 5IK60GN-EF□ 5IK60GN-CF□ 5IK60GN-HF□ 5IK60GN-SF□ 5IK60GN-S3□	5GN□K	50Hz	1.1	1.4	1.9	2.3	2.9	3.4	4.8	5.7	6.8	8.6	10	10	10	10	10	10	10	10	10	10	10
		50Hz	11.2	14.2	19.3	23.4	29.6	34.7	48.9	58.1	69.3	87.7	100	100	100	100	100	100	100	100	100	100	100
		60Hz	0.92	1.1	1.5	1.8	2.3	2.8	3.8	4.6	5.5	6.9	8.3	10	10	10	10	10	10	10	10	10	10
		60Hz	9.38	11.2	15.3	18.3	23.4	28.5	38.7	46.9	56.1	70.1	84.7	100	100	100	100	100	100	100	100	100	100

Mounting screws are included with gearhead.

●Lead Wiring Type①

Weight：Motor：2.7kg Gearhead：1.35kg

Motor Model	Gearhead Model	Gear Ratio	L1
5IK60GN-AF 5IK60GN-EF 5IK60GN-CF 5IK60GN-HF 5IK60GN-SF 5IK60GN-S3F	5GN□K	3~18	42
	5GN□K	25~200	60

●Enter the gear ratio in the box (□) within the model name

●Terminal Box Type②

Weight：Motor：2.85kg Gearhead：1.35kg

Motor Model	Gearhead Model	Gear Ratio	L1
5IK60GN-AFT 5IK60GN-EFT 5IK60GN-CFT 5IK60GN-HFT 5IK60GN-SFT 5IK60GN-S3FT	5GN□K	3~18	42
	5GN□K	25~200	60

●Enter the gear ratio in the box (□) within the model name

●Key•Keyway(Accessory Of Gearhead)

●Shaft Section Of Round Shaft Type

Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.

●Decimal Gearhead

Can be connected to GN pinion shaft type
5GN10XK
Weight：0.6kg

Model		Capacitor Model	L	W	H
Pinion Shaft	Round Shaft	Capacitor Model	L	W	H
5IK60GN-AF□	5IK60A-AF□	ZD200CFAUL	47	23	35
5IK60GN-EF□	5IK60A-EF□	ZD120CFAUL	47	17	31
5IK60GN-CF□	5IK60A-CF□	ZD40BFAUL	47	17	31

●Note: Conventional capacitor is a lead wire type. Inserted 187# is optional

●Enter the code that represents the terminal box type(T) in the box (□) within the model name

●The direction of motor rotation is as viewed from the shaft end of motor.CW represents the clockwise direction，while CCW represents the counterclockwise direction.
●Name indicated in the list is pinion shaft type，also valid for the equivalent round shaft type.

Note:

Change the direction of sinale-phase motor rotation only after bring the motor to a stop.
If an attempt is made to change the direction of rotation while the motor is rotating，motor may ianore reversing command or change its direction of rotation after some delay.

AC Gear Motor

40W Induction AC Motor/Gear Motor

PDF Drawing + Contact us

■ Gear Motor-Torque Table

●Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

●Enter the gear ratio in the box (□) within the model name.

●The speed is calculated by diving the motor's synchronous speed （50Hz：1500r/min、60Hz：1800r/min) by the gear ratio. The actual speed is 2%-20% less than the displaved value,depending on the size of the load.

●To reduce the speed beyond the qear ratio in the table， attach a mid-gearbox （gear ratio：10） between the gearhead and motor. In that case， the permissible torque is 20N.m.

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

Type Motor/Gearhead		Gear Rato		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
5IK40GU-A□ 5IK40GU-E□ 5IK40GU-C□ 5IK40GU-H□ 5IK40GU-S□ 5IK40GN-S3□	5GU□ RC 5GU□ RT	Allowable Torque	50Hz	0.57	0.68	0.59	1.14	1.58	1.89	2.63	3.16	3.79	5.26	6.31	6.8	9.5	11.4	14.2	17.0	18.9	20.0	20.0	20.0
			50Hz	5.80	6.96	9.66	11.6	16.1	19.3	26.8	32.2	38.6	53.7	64.4	70	97	116	145	174	193	200	200	200
			60Hz	0.46	0.55	0.76	0.92	1.27	1.53	2.12	2.55	3.05	4.24	5.09	5.50	7.64	9.16	11.5	13.7	15.3	18.3	20.0	20.0
			60Hz	4.67	5.61	7.79	9.35	13.0	15.6	21.6	26.0	31.2	43.3	51.9	56.1	77.9	93.5	117	140	156	187	200	200

■Induction Type Drawing

■Gear Motor-Torque Table

Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type （T） in the box （口） within the model name.

Enter the gear ratio in the box （口） within the model name.

The speed is calculated by diving the motor's synchronous speed （50Hz：1500r/min、60Hz：1800r/min） by the gear ratio. The actual speed is 2%~20% less than the displayed value，depending on the size of the load.

To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox （gear ratio：10） between the gearhead and motor. In that case， the permissible torque is 20N.m.

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
5IK40GU-A□ 5IK40GU-E□ 5IK40GU-C□ 5IK40GU-H□ 5IK40GU-S□ 5IK40GN-S3□	5GU□RH 5GU□RA	Allowable Torque	50Hz	0.41	0.50	0.62	0.74	0.93	1.11	1.55	1.86	2.23	3.09	3.71	4.46	6.19	7.43	9.28	11.1	12.4	14.9	18.6	20.0
			50Hz	4.21	5.05	6.31	7.58	9.47	11.4	15.8	18.9	22.7	31.6	37.9	45.5	63.1	75.8	94.7	114	126	152	189	200
			60Hz	0.33	0.40	0.50	0.60	0.75	0.90	1.25	1.50	1.80	2.50	2.99	3.59	4.99	5.99	7.49	8.98	9.98	12.0	15.0	18.0
			60Hz	3.39	4.07	5.09	6.11	7.64	9.17	12.7	15.3	18.3	25.5	30.6	36.7	50.9	61.1	76.4	91.7	102	122	153	183

■Induction Type Drawing

■Wiring Diagram

●The direction of motor rotation is as viewed from the shaft end of motor. CW represents the clockwise direction, while CCW represents the counterclockwise direction.

●Name indicated in the list is pinion shaft type, also valid for the equivalent round shaft type.

Note:

Change the direction of single-phase motor rotation only after bring the motor to a stop.

If an attempt is made to change the direction of rotation while the motor is rotating，motor may ignore reversing command or change its direction of rotation after some delay.

Model •Type Upper:Pinion Shaft Below:Round Shaft		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Lead Wire Type Dimensions ①	Terminal Box Type Dimensions ②
5IK40GN-A (5IK40A-A )	5IK40GN-AT (5IK40A-AT )	40	1ph 100	50	0.65	220	315	1250	12.0
				60	0.70		260	1550
5IK40GN-E (5IK40A-E)	5IK40GN-ET (5IK40A-ET)	40	1ph 110	60	0.55	200	260	1550	8.0
			1ph120		0.60
5IK40GN-C (5IK40A-C )	5IK40GN-CT (5IK40A-CT)	40	1ph 220	50	0.35	220	315	1250	2.5
			1ph 230		0.40
5IK40GN-H (5IK40A-H)	5IK40GN-HT (5IK40A-HT)	40	1ph 220	60	0.35	200	260	1550
			1ph 230		0.40
5IK40GN-S (5IK40A-S )	5IK40GN-ST (5IK40A-ST)	40	3ph 220	50	0.30	800	315	1250	-
				60	0.25	660	250	1550
5IK40GN-S3 (5IK40A-S3)	5IK40GN-S3T (5IK40A-S3T)	40	3ph 380	50	0.17	800	315	1250	-
				60	0.14	660	250	1550

●When the motor is approved under various safety standards，the model name on the nameplate is the approved model name.

●Note：90-40W right angle gear motor all motor is（GU）strength type.

●Note:"-A"it means the voltage 110v，the assembly capacitor vaule it is according the label.

●Motor

Type	Model
Type	Pinion Shaft	Round Shaft
Lead Wire Type	5IK40GN-A	5IK40A-A
	5IK40GN-E	5IK40A-E
	5IK40GN-C	5IK40A-C
	5IK40GN-H	5IK40A-H
	5IK40GN-S	5IK40A-S
	5IK40GN-S3	5IK40A-S3
Terminal Box Type	5IK40GN-AT	5IK40A-AT
	5IK40GN-ET	5IK40A-ET
	5IK40GN-CT	5IK40A-CT
	5IK40GN-HT	5IK40A-HT
	5IK40GN-ST	5IK40A-ST
	5IK40GN-S3T	5IK40A-S3T

●Parallel Shaft Gearhead（Sold Separately）

Gearhead Type	Gearhead Model	Gear Ratio
Long Life • Low Noise	5GN□K	3、3.6、5、6、7.5、9、 12.5、15、18、25、30、 36、 50、 60、 75、 90、 100、 120、 150、 180、 200
Long Life • Low Noise	5GN10XK ( Decimal Gearhead )

●Enter the gear ratio in the box (□) within the model name

●Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name.

●Enter the gear ratio in the box（□）within the model name.

●The speed is calculated by dividing the motor's synchronous speed （50Hz ： 1500r/min、60Hz ： 1800r/min） by the gear ratio. The actual speed is 2%~20% less than the displayed value，depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table， attach a decimal gearhead（gear ratio：10）between the gearhead and motor. In that case， the permissible torque is 10 N.m.

Type Motor/Gearhead	Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
	Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
	Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
5IK40GN-A□ 5IK40GN-E□ 5IK40GN-C□ 5IK40GN-H□ 5IK40GN-S□ 5IK40GN-S3□	5GN□K	50Hz	0.77	0.92	1.3	1.5	1.9	2.3	3.2	3.8	4.6	5.7	6.9	8.3	10	10	10	10	10	10	10	10	10
		50Hz	7.85	9.38	13.2	15.3	19.4	23.4	32.6	38.7	46.9	58.1	70.4	84.7	100	100	100	100	100	100	100	100	100
		60Hz	0.63	0.76	1.1	1.3	1.6	1.9	2.6	3.2	3.8	4.7	5.7	6.8	8.6	10	10	10	10	10	10	10	10
		60Hz	6.42	7.75	11.2	13.2	16.3	19.3	26.5	32.6	38.7	47.9	58.1	69.3	87.7	100	100	100	100	100	100	100	100

Mounting screws are included with gearhead.

●Lead Wiring Type①

Weight：Motor：2.4kg Gearhead：1.35kg

Motor Model	Gearhead Model	Gear Ratio	L1
5IK40GN-A 5IK40GN-E 5IK40GN-C 5IK40GN-H 5IK40GN-S 5IK40GN-S3	5GN□K	3~18	42
	5GN□K	25~200	60

●Enter the gear ratio in the box (□) within the model name

●Terminal Box Type②

Weight：Motor：2.55kg Gearhead：1.35kg

Motor Model	Gearhead Model	Gear Ratio	L1
5IK40GN-AT 5IK40GN-ET 5IK40GN-CT 5IK40GN-HT 5IK40GN-ST 5IK40GN-S3T	5GN□K	3~18	42
	5GN□K	25~200	60

●Enter the gear ratio in the box (□) within the model name

●Key•Keyway(Accessory Of Gearhead)

●Shaft Section Of Round Shaft Type

Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.

●Decimal Gearhead

Can be connected to GN pinion shaft type
5GN10XK
Weight：0.6kg

Model		Capacitor Model	L	W	H
Pinion Shaft	Round Shaft	Capacitor Model	L	W	H
5IK40GN-A□	5IK40A-A□	ZD120CFAUL	47	17	31
5IK40GN-E□	5IK40A-E□	ZD80CFAUL	48	26.5	38
5IK40GN-C□	5IK40A-C□	ZD25BFAUL	38	17	28

●Note: Conventional capacitor is a lead wire type. Inserted 187# is optional

●Enter the code that represents the terminal box type (T) in the box (□ ) within the model name

AC Gear Motor

25W Induction AC Motor/Gear Motor

PDF Drawing + Contact us

■ Gear Motor-Torque Table

●Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (D) within the model name

●Enter the gear ratio in the box (□) within the model name.

●The speed is calculated by diving the motor's synchronous speed (50Hz：1500r/min、60Hz：1800r/min) by the gear ratio. The actual speed is 2%-20% less than the displaved value, depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table， attach a mid-gearbox (gear ratio：10) between the gearhead and motor. In that case, the permissible torque is 8N.m.

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

Type Motor/Gearhead		Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
4IK25GN-A□ 4IK25GN-E□ 4IK25GN-C□ 4IK25GN-H□ 4IK25GN-S□ 4IK25GN-S3□	4GN□RC 4GN□RT	Allowable Torque	50Hz	0.36	0.43	0.59	0.71	0.99	1.18	1.64	1.97	2.37	3.29	3.95	4.73	6.58	7.10	8.00	8.00	8.00	8.00	8.00	8.00
			50Hz	3.62	4.35	6.04	7.25	10.1	12.1	16.8	20.1	24.2	33.5	40.3	48.3	67.1	72.5	80.0	80.00	80.00	80.00	80.00	80.00
			60Hz	0.29	0.34	0.48	0.57	0.80	0.95	1.33	1.59	1.91	2.65	3.18	3.82	5.30	5.73	7.16	8.00	8.00	8.00	8.00	8.00
			60Hz	2.92	3.51	4.87	5.84	8.12	9.74	13.5	16.2	19.5	27.1	32.5	39.0	54.1	58.4	73.0	80.00	80.00	80.00	80.00	80.00

■Induction Type Drawing

■Gear Motor-Torque Table

Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (口) within the model name.

Enter the gear ratio in the box (口) within the model name.

The speed is calculated by diving the motor's synchronous speed (50Hz：1500r/min、60Hz：1800r/min) by the gear ratio. The actual speed is 2%~20% less than the displayed value，depending on the size of the load.

To reduce the speed beyond the gear ratio in the table, attach a mid-gearbox (gear ratio：10) between the gearhead and motor. In that case， the permissible torque is 8N.m

■Allowance Torque Unit：Upside（N.m）/Belowside（kgf.cm）

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	42	30	25	20	16	15	12	10	8
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10
4IK25GN-A□ 4IK25GN-E□ 4IK25GN-C□ 4IK25GN-H□ 4IK25GN-S□ 4IK25GN-S3□	4GN□RH 4GN□RA	Allowable Torque	50Hz	0.26	0.31	0.39	0.46	0.58	0.70	0.97	1.16	1.39	1.93	2.32	2.78	3.87	4.64	5.80	6.96	7.74	8.00	8.00	8.00
			50Hz	2.63	3.16	3.95	4.74	5.92	7.10	9.87	11.8	14.2	19.7	23.7	28.4	39.5	47.4	59.2	71.0	78.9	80.0	80.0	80.0
			60Hz	0.21	0.31	0.39	0.46	0.58	0.70	0.97	1.16	1.39	1.93	2.32	2.78	3.87	4.64	5.82	6.96	7.74	8.00	8.00	8.00
			60Hz	2.12	3.16	3.95	4.74	5.92	7.10	9.87	11.8	14.2	19.7	23.7	28.4	39.5	47.4	59.2	71.0	78.9	80.0	80.0	8.00

■Induction Type Drawing

■Wiring Diagram

●The direction of motor rotation is as viewed from the shaft end of motor. CW represents the clockwise direction, while CCW represents the counterclockwise direction.

●Name indicated in the list is pinion shaft type, also valid for the equivalent round shaft type.

Model •Type Upper:Pinion Shaft Below:Round Shaft		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Lead Wire Type Dimensions ①	Terminal Box Type Dimensions ②
4IK25GN-A (4IK25A-A)	4IK25GN-AT (4IK25A-AT )	25	1ph 100	50	0.50	120	200	1250	8.0
				60	0.55		165	1550
4IK25GN-E (4IK25-E)	4IK25GN-ET (4IK25A-ET)	25	1ph 110	60	0.45	120	165	1550	7.0
			1ph 120		0.50
4IK25GN-C (4IK25A-C )	4IK25GN-CT (4IK25A-CT)	25	1ph 220	50	0.25	120	200	1250	1.8
			1ph 230		0.23
4IK25GN-H (4IK25A-H)	4IK25GN-HT (4IK25A-HT)	25	1ph 220	60	0.23	120	165	1550
			1ph 230
4IK25GN-S (4IK25A-S )	4IK25GN-ST (4IK25A-ST)	25	3ph 220	50	0.185	350	200	1250	-
				60	0.170	250	165	1550
4IK25GN-S3 (4IK25A-S3)	4IK25GN-S3 (4IK25A-S3T)	25	3ph 380	50	0.106	350	200	1250	-
				60	0.098	250	165	1550

●When the motor is approved under various safety standards，the model name on the nameplate is the approved model name.

●Note:"-A"it means the voltage 110v，the assembly capacitor vaule it is according the label.

●Motor

Type	Model
Type	Pinion Shaft	Round Shaft
Lead Wire Type	4IK25GN-A	4IK25A-A
	4IK25GN-E	4IK25A-E
	4IK25GN-C	4IK25A-C
	4IK25GN-H	4IK25A-H
	4IK25GN-S	4IK25A-S
	4IK25GN-S3	4IK25A-S3
Terminal Box Type	4IK25GN-AT	4IK25A-AT
	4IK25GN-ET	4IK25A-ET
	4IK25GN-CT	4IK25A-CT
	4IK25GN-HT	4IK25A-HT
	4IK25GN-ST	4IK25A-ST
	4IK25GN-S3T	4IK25A-S3T

●Parallel Shaft Gearhead（Sold Separately）

Gearhead Type	Gearhead Model	Gear Ratio
Long Life • Low Noise	4GN□K	3、3.6、5、6、7.5、9、 12.5、15、18、25、30、 36、 50、 60、 75、 90、 100、 120、 150、 180、 200
Long Life • Low Noise	4GN10XK (Decimal Gearhead)

●Enter the gear ratio in the box (□) within the model name.

●Gearhead and mid-gearbox can be sold separately. Enter the code that represents the terminal box type (T) in the box (□) within the model name

●Enter the gear ratio in the box（□）within the model name.

●The speed is calculated by dividing the motor's synchronous speed （50Hz ： 1500r/min、60Hz ： 1800r/min） by the gear ratio. The actual speed is 2%~20% less than the displayed value，depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table， attach a decimal gearhead（gear ratio：10）between the gearhead and motor. In that case， the permissible torque is 8 N.m.

Type Motor/Gearhead	Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
	Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
	Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
4IK25GN-A□ 4IK25GN-E□ 4IK25GN-C□ 4IK25GN-H□ 4IK25GN-S□ 4IK25GN-S3□	4GN□K	50Hz	0.49	0.58	0.81	0.97	1.2	1.5	2.0	2.4	2.9	3.7	4.4	5.3	6.6	7.9	8	8	8	8	8	8	8
		50Hz	5.00	5.91	8.26	9.89	12.2	15.3	20.4	24.4	29.6	37.7	44.9	54.1	67.3	80	80	80	80	80	80	80	80
		60Hz	0.40	0.48	0.67	0.80	1.0	1.2	1.7	2.0	2.4	3.0	3.6	4.3	5.4	6.5	8	8	8	8	8	8	8
		60Hz	4.08	4.89	6.83	8.16	10.2	12.2	17.3	20.4	24.4	30.6	36.7	43.8	55.1	66.3	80	80	80	80	80	80	80

Mounting screws are included with gearhead.

●Lead Wiring Type①

Weight：Motor：1.6kg Gearhead：0.80kg

Motor Model	Gearhead Model	Gear Ratio	L1
4IK25GN-A 4IK25GN-E 4IK25GN-C 4IK25GN-H 4IK25GN-S 4IK25GN-S3	4GN□K	3~18	32
	4GN□K	25~200	43.5

●Enter the gear ratio in the box (□) within the model name

●Terminal Box Type②

Weight：Motor：1.75kg Gearhead：0.8kg

Motor Model	Gearhead Model	Gear Ratio	L1
4IK25GN-AT 4IK25GN-ET 4IK25GN-CT 4IK25GN-HT 4IK25GN-ST 4IK25GN-S3T	4GN□K	3~18	32
	4GN□K	25~200	43.5

●Enter the gear ratio in the box (□) within the model name

●Key•Keyway(Accessory Of Gearhead)

●Shaft Section Of Round Shaft Type

Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.

●Decimal Gearhead

Can be connected to GN pinion shaft type
4GN10XK
Weight：0.41kg

Model		Capacitor Model	L	W	H
Pinion Shaft	Round Shaft	Capacitor Model	L	W	H
4IK25GN-A□	4IK25A-A□	ZD80CFAUL	48	26.5	38
4IK25GN-E□	4IK25A-E□	ZD70CFAUL	47	24	37
4IK25GN-C□	4IK25A-C□	ZD18BFAUL	36	13.5	24

●Note: Conventional capacitor is a lead wire type. Inserted 187# is optional

●Enter the code that represents the terminal box type "T" in the box (□ ) within the model name

AC Gear Motor

15W Induction AC Motor/ Gear Motor

PDF Drawing + Contact us

Model•Type Lead Wire Type		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Ratad Speed r/min	Capacitor μF
Pinion Shaft	Round Shaft
3IK15GN-A	3IK15A-A	15	1ph 100	50	0.35	90	125	1200	6.0
				60	0.33	85	105	1450
3IK15GN-E	3IK15A-E	15	1ph 110	60	0.30	65	105	1450	5.0
			1ph 120		0.32
3IK15GN-C	3IK15A-C	15	1ph 220	50	0.18	90	125	1200	1.2
			1ph 230		0.20
3IK15GN-H	3IK15A-H	15	1ph 220	60	0.16	65	1G5	1450
			1ph 230		0.15	70
3IK15GN-S	3IK15A-S	15	3ph 220	50	0.14	220	125	1200	-
				60	0.12	180	105	1450
3IK15GN-S3	3IK15A-S3	15	3ph 380	50	0.08	220	125	1200	-
				60	0.07	180	105	1450

●When the motor is approved under various safety standards，the model name on the nameplate is the approved model name.

●Note:"-A"it means the voltage 110v，the assembly capacitor vaule it is according the label.

●Motor

Type	Model
Type	Pinion Shaft	Round Shaft
Lead Wire Tvpe	3IK15GN-A	3IK15A-A
	3IK1SGN-E	3IK15A-E
	3IK15GN-C	3IK15A-C
	3IK15GN-H	3IK15A-H
	3IK15GN-S	3IK15A-S
	3IK15GN-S3	3IK15A-S3

●Parallel Shaft Gearhead（Sold Separately）

Geartiead Type	Gearhead Model	Gear Ratio
Long Life • Low Noise	3GN□K	3、3.6、5、6、7,5、9、 12.5、15、18、 25、30、 36、 50、 60、 75、 90、 100、 120、 150、 180、 200
Long Life • Low Noise	3GN10XK(Decimal Gearhead )

●Enter the gear ratio in the box (□) within the model name

●Gearhead and mid-gearbox can be sold separately.

●Enter the gear ratio in the box（□）within the model name.

●The speed is calculated by dividing the motor's synchronous speed （50Hz ： 1500/min， 60Hz ： 1800/min） by the gear ratio. The actual speed is 2%-20% less than the displayed value，depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table， attach a decimal gearhead（gear ratio：10）between the gearhead and motor. In that case， the permissible torque is 5 N.m.

Type Motor/Gearhead	Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
	Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
	Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
3IK15GN-A 3IK15GN-E 3IK15GN-C 3IK15GN-H 3IK15GN-S 3IK15GN-S3	3GN□K	50Hz	0.30	0.36	0.51	0.61	0.76	0.91	1.3	1.5	1.8	2.3	2.7	3.3	4.1	5	5	5	5	5	5	5	5
		50Hz	3.06	3.67	5.20	6.22	7.75	9.28	13.2	15.3	18.3	23.4	27.5	33.7	41.8	50	50	50	50	50	50	50	50
		60Hz	0.26	0.31	0.43	0.51	0.64	0.77	1.1	1.3	1.5	1.9	2.3	2.8	3.5	4.2	5	5	5	5	5	5	5
		60Hz	2.65	3.16	4.38	5.20	6.53	7.85	11.2	13.2	15.3	19.3	23.4	28.5	35.7	42.8	50	50	50	50	50	50	50

Mounting screws are included with gearhead.

●Lead Wiring Type

Weight：Motor：1.1kg Gearhead：0.5kg

Motor Model	Gearhead Model	Gear Ratio	L1
3IK15GN-A 3IK15GN-E 3IK15GN-C 3IK15GN-H 3IK15GN-S 3IK15GN-S3	3GN□K	3~18	32
	3GN□K	25~200	42

Enter the gear ratio in the box(□)within the model name.

●Key•Keyway(Accessory Of Gearhead)

●Shaft Section Of Round Shaft Type

Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.

●Decimal Gearhead

Can be connected to GN pinion shaft type
3GN10XK
Weight：0.3kg

Model		Capacitor Model	L	W	H
Pinion Shaft	Round Shaft	Capacitor Model	L	W	H
3IK15GN-A	3IK15A-A	ZD60CFAUL	48	23	32
3IK15GN-E	3IK15A-E	ZD50CFAUL	47	20	31
3IK15GN-C	3IK15A-C	ZD12BFAUL	36	12	22

●Note: Conventional capacitor is a lead wire type. Inserted 187# is optional.

●The direction of motor rotation is as viewed from the shaft end of motor. CW represents the clockwise direction, while CCW represents the counterclockwise direction.

●Name indicated in the list is pinion shaft type, also valid for the equivalent round shaft type.

Note:

Change the direction of single-phase motor rotation only after bring the motor to a stop.

If an attempt is made to change the direction of rotation while the motor is rotating，motor may ignore reversing command or change its direction of rotation after some delay.

AC Gear Motor

6W Induction AC Motor/Gear Motor

PDF Drawing + Contact us

Model•Type Lead Wire Type		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Pinion Shaft	Round Shaft
2IK6GN-A	2IK6A-A	6	1ph 100	50	0.240	55	48	1200	３.5
				60	0.250	50	40	1450
2IK6GN-E	2IK6A-E	6	1ph 110	60	0.160	40	40	1450	2
			1ph 120		0.180
2IK6GN-C	2IK6A-C	6	1ph 220	50	0.130	50	48	1200	0.8
			1ph 230		0.140		40	1450
2IK6GN-H	2IK6A-H		1ph 220	60	0.130	55	40	1450
			1ph 230		0.140
2IK6GN-S	2IK6A-S	6	３ph 220	50	0.076	85	48	1200	-
				60	0.065	70	40	1450
2IK6GN-S3	2IK6A-S3	6	3 ph 380	50	0.044	85	48	1200	-
				60	0.038	70	40	1450

●When the motor is approved under various safety standards，the model name on the nameplate is the approved model name.

●Note:"-A"it means the voltage 110v，the assembly capacitor vaule it is according the label.

●Motor

Type	Model
Type	Pinion Shaft	Round Shaft
Lead Wire Type	2IK6GN-A	2IK6A-A
	2IK6GN-E	2IK6A-E
	2IK6GN-C	2IK6A-C
	2IK6GN-H	2IK6A-H
	2IK6GN-S	2IK6A-S
	2IK6GN-S3	2IK6A-S3

●Parallel Shaft Gearhead（Sold Separately）

Gearhead Type	Gearhead Model	Gear Ratio
Long Life • Low Noise	2GN□K	３、3.6、5、6、7.5、9、12.5、 15、18、25、30、36、50、60、 75、90、100、120、150、180、200
Long Life • Low Noise	2GN10XK (Decimal Gearhead)

●Enter the gear ratio in the box (□) within the model name

●Gearhead and mid-gearbox can be sold separately.

●Enter the gear ratio in the box（□）within the model name.

●The speed is calculated by dividing the motor's synchronous speed （50Hz ： 1500/min， 60Hz ： 1800/min） by the gear ratio. The actual speed is 2%-20% less than the displayed value，depending on the size of the load.

●To reduce the speed beyond the gear ratio in the table， attach a decimal gearhead（gear ratio：10）between the gearhead and motor. In that case， the permissible torque is 3 N.m.

Type Motor/Gearhead	Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
	Speed r/min	50Hz	500	417	３00	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
	Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
2IK6GN-A 2IK6GN-E 2IK6GN-C 2IK6GN-H 2IK6GN-S 2IK6GN-S3	2GN□K	50Hz	0.12	0.14	0.19	0.23	0.29	0.35	0.49	0.58	0.70	0.88	1.1	1.3	1.6	1.9	2.4	2.9	3	3	3	3	3
		50Hz	1.22	1.43	1.94	2.35	2.96	3.57	5.0	5.92	7.14	8.98	11.2	13.3	16.3	19.4	24.5	29.6	30	30	30	30	30
		60Hz	0.10	0.12	0.16	0.19	0.24	0.29	0.41	0.49	0.58	0.73	0.88	1.1	1.3	1.6	2.0	2.4	2.6	3	3	3	3
		60Hz	1.02	1.22	1.63	1.94	2.45	2.96	4.18	5.0	5.92	7.45	8.98	11.2	13.3	16.3	20.4	24.5	26.5	30	30	30	30

Mounting screws are included with gearhead.

●Lead Wiring Type

Weight：Motor：0.75kg Gearhead：0.4kg

Motor Model	Gearhead Model	Gear Ratio	L1
2IK6GN-A 2IK6GN-E 2IK6GN-C 2IK6GN-H 2IK6GN-S 2IK6GN-S3	2GN□K	3~18	32
2IK6GN-A 2IK6GN-E 2IK6GN-C 2IK6GN-H 2IK6GN-S 2IK6GN-S3	2GN□K	25~200	41.5

Enter the gear ratio in the box(□)within the model name

●Shaft Section Of Round Shaft Type

Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.

●Decimal Gearhead

Can be connected to GN pinion shaft type
2GN10XK
Weight：0.2kg

Model		Capacitor Model	L	W	H
Pinion Shaft	Round Shaft	Capacitor Model	L	W	H
2IK6GN-A	2IK6A-A	ZD35CFAUL	38	19.5	31
2IK6GN-E	2IK6A-E	ZD20CFAUL	36	15	25
2IK6GN-C	2IK6A-C	ZD08CFAUL	36	10.5	20

●Note: Conventional capacitor is a lead wire type. Inserted 187# is optional

●The direction of motor rotation is as viewed from the shaft end of motor. CW represents the clockwise direction, while CCW represents the counterclockwise direction.

●Name indicated in the list is pinion shaft type, also valid for the equivalent round shaft type.

Note:

Change the direction of single-phase motor rotation only after bring the motor to a stop.

If an attempt is made to change the direction of rotation while the motor is rotating，motor may ignore reversing command or change its direction of rotation after some delay.

AC Gear Motor

3W Induction AC Motor/Gear Motor

PDF Drawing + Contact us

Model•Type Lead Wire Type		Output power W	Voltage V	Frequency Hz	Current A	Starting Torque mN.m	Rated Torque mN.m	Rated Speed r/min	Capacitor μF
Pinion Shaft	Round Shaft
0IK3GN-B	0IK3A-B	3	1ph 110	50	0.120	5	11	2500	1.5
				60	0.130		10	3000
0IK3GN-D	0IK3A-D	3	1ph 220	50	0.060	5	11	2500	0.35
				60	0.064		10	3000

●When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.

●Motor

Type	Model
	Pinion Shaft	Round Shaft
Lead Wire Type	0IK3GN-B	0IK3A-B
	0IK3GN-D	0IK3A-D

●Parallel Shaft Gearhead（Sold Separately）

Gearhead Type	Gearhead Model	Gear Ratio
Long Life • Low Noise	0GN□K	3、3.6、5、6、7.5、9、 12.5、15、18、25、30、36、 50、 60

●Enter the gear ratio in the box (□) within the model name

●Gearhead are sold separately. Decimal gearheads are not available.

●Enter the gear ratio in the box（□） within the model name

●The speed is calculated by dividing the motor's synchronous speed（2P Type 50Hz ： 3000r/min ﹑60Hz ： 3600r/min） by the gear ratio. The actual speed is 2%~33% less than the displayed value, depending on the size of the load.

Type Motor/Gearhead	Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60
	Speed r/min	50Hz	1000	833	600	500	400	333	240	200	166	120	100	83	60	50
	Speed r/min	60Hz	1200	1000	720	600	480	400	288	240	200	144	120	100	72	60
0IK3GN-B 0IK3GN-D	0GN□K	50Hz	0.027	0.032	0.045	0.053	0.067	0.080	0.10	0.12	0.14	0.18	0.22	0.26	0.36	0.44
		50Hz	0.28	0.33	0.46	0.54	0.68	0.82	1.02	1.22	1.43	1.84	2.24	2.65	3.67	4.49
		60Hz	0.024	0.029	0.041	0.049	0.061	0.073	0.091	0.1	0.13	0.17	0.20	0.24	0.33	0.40
		60Hz	0.24	0.30	0.42	0.50	0.62	0.74	0.93	1.12	1.33	1.73	2.04	2.45	3.67	4.08

Mounting screws are included with gearhead.

●Lead Wiring Type

Weight：Motor：0.3kg Gearhead：0.2kg

●Shaft Section Of Round Shaft Type

Excluding weight and the shaft section motor shape are the same as those of the pinion shaft type.

Model		Capacitor Model	L	W	H
Pinion Shaft	Round Shaft	Capacitor Model	L	W	H
0IK3GN-B	0IK3A-B	ZD15CFAUL	36	12.5	24
0IK3GN-D	0IK3A-D	ZD035CFAUL	26	8	17

●Note: Conventional capacitor is a lead wire type. Inserted 187# is optional

●The direction of motor rotation is as viewed from the shaft end of motor. CW represents the clockwise direction, while CCW represents the counterclockwise direction

●Name indicated in the list is pinion shaft type, also valid for the equivalent round shaft type.

Note:

Change the direction of single-phase motor rotation only after bring the motor to a stop.

If an attempt is made to change the direction of rotation while the motor is rotating，motor may ignore reversing command or change its direction of rotation after some delay.

Web Menu

Product Search

Language

Share

Exit Menu

Right Angle Type

Parallel Shaft

Call a motor Specialist

To make a higher power motor.

6W Reversible AC Motor/Gear Motor

●Motor

●Parallel Shaft Gearhead (Sold Separately)

200W Induction AC Motor/Gear Motor

140W Induction AC Motor/Gear Motor

120W Induction AC Motor/Gear Motor

120W Induction AC Motor/Gear Motor

90W Induction AC Motor/Gear Motor

60W Induction AC Motor/Gear Motor

40W Induction AC Motor/Gear Motor

25W Induction AC Motor/Gear Motor

6W~150W 2-Poles High Speed Induction AC Motor

●Motor

200W Induction AC Motor/Gear Motor

■ Gear Motor-Torque Table

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

■Induction,Reversible Type Drawing

■Wiring Diagram

●Motor

●Parallel Shaft Gearhead(Sold Separately)

140W Induction AC Motor/Gear Motor

■ Gear Motor-Torque Table

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

■Induction Type Drawing

■Wiring Diagram

●Motor

●Parallel Shaft Gearhead(Sold Separately)

120W Induction AC Motor/Gear Motor

■Gear Motor-Torque Table

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

■Induction Type Drawing

■Gear Motor-Torque Table

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

■Induction Type Drawing

■Wiring Diagram

●Motor

●Parallel Shaft Gearhead(Sold Separately)

90W Induction AC Motor/Gear Motor

■Gear Motor-Torque Table

■Allowable Torque Unit：Upside（N.m)/Belowside（kgf.cm）

■Induction Type Drawing

■Gear Motor-Torque Table

■Allowable Torque Unit：Upside（N.m)/Belowside（kgf.cm）

■Induction Type Drawing

■Wiring Diagram

●Motor

●Parallel Shaft Gearhead（Sold Separately）

60W Induction AC Motor/Gear Motor

■ Gear Motor-Torque Table

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

■Induction Type Drawing

■Gear Motor-Torque Table

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

■Induction Type Drawing

●Motor

●Parallel Shaft Gearhead（Sold Separately）

40W Induction AC Motor/Gear Motor

■ Gear Motor-Torque Table

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

■Induction Type Drawing

■Gear Motor-Torque Table

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

■Induction Type Drawing

■Wiring Diagram

●Motor

●Parallel Shaft Gearhead（Sold Separately）

25W Induction AC Motor/Gear Motor

■ Gear Motor-Torque Table

■Allowable Torque Unit：Upside（N.m）/Belowside（kgf.cm）

■Induction Type Drawing

■Gear Motor-Torque Table

Call a motor
Specialist

To make a higher
power motor.